

The FH120 is a 20,000 BTU heat pump that runs on a standard 120V outlet, making it one of the few pool heaters that don't need a dedicated 240V line. It suits above-ground pools up to 15' round or 12'x18' oval, and in-ground pools up to 5,000 gallons. It heats water to 82°F at 82% humidity and delivers about 4.81x heat per dollar of electricity. Compared with gas heaters, it is slower to heat but far cheaper to run; compared with larger 240V heat pumps, it has lower output and a narrower temperature range. Owners praise its easy installation and low electrical draw, but some note it struggles in cool, humid weather.
In stockReturn policy
Reviewers give the FH120 high marks for its easy installation and ability to run on a standard outlet. Many say it keeps their above-ground pool comfortable, though some note it heats slowly in cooler weather.
The FH120 is a 120-volt swimming pool heat pump with a 20,000 BTU output. It plugs into a standard 3-prong, 120V outlet. It is rated to heat water to 82 degrees while operating at 82% humidity.
It heats above-ground pools up to 15' round or 12' x 18' oval, and in-ground pools up to 5,000 gallons. A simple digital controller sets the temperature. The case is weatherproof, enamel-coated steel. Included fittings allow quick installation and connect it to an existing pool system.
Heat pumps are not meant to bring pool water to 85-100 degrees. Initial heating may take 2-3 days to reach the desired temperature. Covering the pool with a bubble cover or plastic sheet helps hold in the heat.