Do I need an enclosure to print Flashforge ABS?

Yes, an enclosure is strongly recommended. ABS shrinks as it cools, and a stable warm chamber is the main defense against warping and layer splitting.

How is ABS different from PLA for functional parts?

ABS is tougher and holds up at higher temperatures, so it suits brackets and parts near heat. PLA is easier to print but softens in a hot car and is more brittle.

Does it work on any 1.75 mm printer?

It fits any printer that takes 1.75 mm filament, but the printer needs a hotend reaching about 230–250 °C and a heated bed. An all-metal hotend and enclosure help.

How should I store the filament?

Keep it sealed with a desiccant when not in use. ABS absorbs less moisture than nylon, but damp filament still prints with popping and weak layers.

Can ABS prints be smoothed?

Yes. Acetone vapor smoothing gives ABS parts a glossy, sealed surface, something PLA and PETG cannot do the same way.

Is it food safe or safe for indoor use?

No. ABS fumes are best vented outdoors or filtered, and printed ABS is not considered food safe.

Flashforge ABS Filament 1.75mm High Impact Heat Resistant

Last price we saw

$24.99at Best Buy, last seen Nov 10

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Check today's price at Best Buy

Flashforge discount codes →

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $24.99 at Best Buy on Nov 10.

Our take on the Flashforge ABS Filament 1.75mm High Impact Heat Resistant

Flashforge ABS is a 1.75 mm engineering filament for FDM printers, sold in white and multicolor. ABS gives parts higher impact strength and heat resistance than PLA, so it suits functional parts, brackets and enclosures that see heat or knocks. It needs an enclosed printer and good ventilation: it warps on open beds and gives off fumes while printing. Compared with PLA it is tougher and more heat tolerant but harder to print; compared with PETG it is stiffer and more heat resistant but fussier about cooling and enclosure.

Best forFunctional parts that see heat or impactMakers with an enclosed printerVentilated workshops or garagesBrackets, enclosures and tool holders

Pros

Higher impact strength than standard PLA
Holds shape at temperatures PLA cannot
Rigid, machinable finished parts
Acetone-vapor smoothing possible
Fits the common 1.75 mm printer standard

Cons

Flashforge ABS Filament 1.75mm High Impact Heat Resistant prices at every store

Best BuyNew
Out of stock
$24.99Checked 15 h ago
Visit Best Buy

Store links may earn us a commission. Price via Klarna.

Flashforge ABS Filament 1.75mm High Impact Heat Resistant price history

Lowest price we've seen: $24.99 on Nov 10 at Best Buy. Tracked across 1 store since Nov 10.

What reviewers say

Owners of Flashforge ABS report solid, tough prints once the printer is enclosed and the bed is hot, and they value the heat resistance for functional parts. Most complaints center on warping and fumes, which they say make an enclosure and ventilation non-negotiable.

What people mention

WarpingCriticisedOwners say large flat parts lift at the corners unless the printer is enclosed and the bed is hot.
FumesCriticisedReviewers report a strong smell while printing and recommend ventilation or an air filter.
StrengthPraisedUsers find printed parts tough and rigid, holding up to impact better than PLA.

Questions and answers

Do I need an enclosure to print Flashforge ABS?: Yes, an enclosure is strongly recommended. ABS shrinks as it cools, and a stable warm chamber is the main defense against warping and layer splitting.
How is ABS different from PLA for functional parts?: ABS is tougher and holds up at higher temperatures, so it suits brackets and parts near heat. PLA is easier to print but softens in a hot car and is more brittle.
Does it work on any 1.75 mm printer?: It fits any printer that takes 1.75 mm filament, but the printer needs a hotend reaching about 230–250 °C and a heated bed. An all-metal hotend and enclosure help.
How should I store the filament?: Keep it sealed with a desiccant when not in use. ABS absorbs less moisture than nylon, but damp filament still prints with popping and weak layers.
Can ABS prints be smoothed?: Yes. Acetone vapor smoothing gives ABS parts a glossy, sealed surface, something PLA and PETG cannot do the same way.
Is it food safe or safe for indoor use?: No. ABS fumes are best vented outdoors or filtered, and printed ABS is not considered food safe.