Does this ABS need an enclosure?

It is not required, but an enclosure greatly reduces warping and keeps fumes contained. Large flat parts are the most likely to lift without one.

What nozzle and bed temperatures should I use?

ABS typically prints around 250–270°C at the nozzle with a bed near 90–100°C. Start at the middle of those ranges and adjust for your printer.

Will it work on my printer?

It fits any printer that takes 1.75mm filament and can reach ABS temperatures. Creality lists the K1, K1 Max, Ender-5 S1, Neptune 4, Kobra 2 and Prusa among compatible machines.

How is it different from regular ABS?

Hyper ABS is formulated for higher print speeds, so it holds up on fast printers where standard ABS may struggle. Strength and heat resistance are comparable.

Is it stronger than PLA?

Yes, ABS is tougher and handles higher temperatures than PLA. PLA is easier to print and has less odor.

What do buyers say about the Creality Hyper ABS Filament 3D Printer Filament 1.75mm?

Rated 4.6 out of 5 from 16 ratings.

Creality Hyper ABS Filament 3D Printer Filament 1.75mm

Best price now

$16.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Creality Hyper ABS Filament 3D Printer Filament 1.75mm

Best price now

$16.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $16.99 at Walmart on Nov 10.

Our take on the Creality Hyper ABS Filament 3D Printer Filament 1.75mm

Creality Hyper ABS is a 1.75mm ABS filament tuned for fast printing on high-speed machines. Creality rates it for speeds up to around 300 mm/s, well above standard ABS, and it works on the K1, K1 Max and Ender-5 S1 as well as most open-market printers. ABS gives stronger, more heat-resistant parts than PLA but needs an enclosure and ventilation to avoid warping and fumes. Reviewers rate it well for print quality and ease of use, though ABS remains fussier than PLA.

Best forOwners of fast printers like the K1 or Neptune 4Functional parts that need heat resistanceHobbyists with an enclosed printerMakers moving up from PLA

Pros

Rated for high-speed printing, up to about 300 mm/s
ABS takes more heat and stress than PLA
Works on Creality and most other open-market printers
Good layer adhesion and surface finish reported
Consistent 1.75mm diameter

Cons

Needs an enclosure to limit warping
Gives off fumes; ventilate the room
Higher printing temperatures than PLA
Less forgiving of drafts and cooling

Creality Hyper ABS Filament 3D Printer Filament 1.75mm prices at every store

WalmartNew
In stockSold by CREALITY STOREReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$16.99Free shippingChecked Nov 10
Visit Walmart

What reviewers say

4.6 / 516 ratings

Buyers rate it 4.6 out of 5 across 16 ratings, praising print quality and easy setup on fast printers. Complaints center on the usual ABS demands: warping and fumes.

What people mention

Print qualityPraisedBuyers report clean, strong parts with good layer adhesion.
SpeedPraisedIt keeps up with high-speed printers without obvious quality loss.
WarpingCriticisedLarge parts can lift at the corners without an enclosure.
FumesCriticisedPrinting gives off an odor, so ventilation matters.

About the Creality Hyper ABS Filament 3D Printer Filament 1.75mm

Creality Hyper ABS is a 1.75mm ABS filament for 3D printing. It is sold as a single spool in white.

It works with many Creality printers, including the K1, K1 Max and Ender-5 S1. It is also compatible with other high-speed 3D printers.

Material: ABS
Diameter: 1.75mm
Color: White
Pieces: 1
Creality compatibility: K1, K1 Max, Ender-5 S1, and most other Creality 3D printers
Other compatibility: ANYCUBIC Kobra 2, ELEGOO Neptune 4, ANKERMAKE M5 and M5C, Flashforge Adventurer 3 Pro2 and Adventurer 4 Pro, Prusa, Monoprice, FLSUN V400, Artillery, QIDI Max3

Specifications

number_of_pieces: 1Source
actual_color: WhiteSource
color: WhiteSource

Questions and answers

Does this ABS need an enclosure?: It is not required, but an enclosure greatly reduces warping and keeps fumes contained. Large flat parts are the most likely to lift without one.
What nozzle and bed temperatures should I use?: ABS typically prints around 250–270°C at the nozzle with a bed near 90–100°C. Start at the middle of those ranges and adjust for your printer.
Will it work on my printer?: It fits any printer that takes 1.75mm filament and can reach ABS temperatures. Creality lists the K1, K1 Max, Ender-5 S1, Neptune 4, Kobra 2 and Prusa among compatible machines.
How is it different from regular ABS?: Hyper ABS is formulated for higher print speeds, so it holds up on fast printers where standard ABS may struggle. Strength and heat resistance are comparable.
Is it stronger than PLA?: Yes, ABS is tougher and handles higher temperatures than PLA. PLA is easier to print and has less odor.
Where is the Creality Hyper ABS Filament 3D Printer Filament 1.75mm cheapest?: At Walmart, for $16.99, as of our latest check.
What do buyers say about the Creality Hyper ABS Filament 3D Printer Filament 1.75mm?: Rated 4.6 out of 5 from 16 ratings.