
Flashforge Adventurer 5M
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Flashforge Adventurer 5M is an open-frame FDM 3D printer with a 220 × 220 × 220 mm build volume, a direct drive extruder and automatic bed levelling. Its headline is speed: up to 600 mm/s with 20,000 mm/s² acceleration, well above the 100–200 mm/s typical of budget FDM printers. It suits hobbyists, print farms and small studios that want fast setup and fast prints, but the open frame limits it to PLA, PETG and other low-warp materials rather than ABS or ASA. Against enclosed rivals it trades material range for speed and simplicity.
In stockShips from Spain · duties may applyReturn policy
The Flashforge Adventurer 5M is an open-frame FDM 3D printer with a build volume of 220 × 220 × 220 mm. It prints at a maximum speed of 600 mm/s with maximum acceleration of 20,000 mm/s². The nozzle reaches up to 280°C and the heated bed up to 110°C.
It uses a direct drive extruder mounted above the hot end rather than a remote Bowden setup, which improves retraction control and reduces stringing. Bed levelling is automatic, and parts print onto a dual-sided PEI spring steel plate. Input shaping and motion control compensate for resonance that would otherwise appear at high acceleration.
The printer connects over Wi-Fi or USB and is ready to use out of the box in under 10 minutes. It prints PLA, PETG and ABS, and the direct drive extruder handles flexible TPU reliably. Because the frame is open, printing ABS calls for careful management of the ambient temperature to reduce warping.
It checks today's price at every store, compares the alternatives and answers in about a minute.