The MIG140R is a 3-in-1 welder that handles MIG welding with flux-core wire, lift TIG, and manual welding. It has a 140A output and welds material up to 1/8 inch thick. It runs on 110V power.
The unit is a rectangular inverter welder with a top carry handle, a front control panel, and a side vent grille. The front panel has two digital displays and two rotary knobs. The displays show voltage, current, and other parameters, so you can check the machine's status without removing your helmet.
After you select the welding wire diameter, the welder automatically matches the welding voltage and wire feed speed. Experienced welders can use manual MIG to adjust voltage and current. Built-in protection includes overcurrent, overload, overheating, and overvoltage protection. The welder comes with a cable and clamp, a torch cable, a spool of wire, and two small metal tips.
- Model
- MIG140R
- Welding processes
- MIG with flux-core wire, lift TIG, manual welding
- Output
- 140A
- Maximum material thickness
- Up to 1/8 inch
- Power
- 110V
- Control
- Cooperative or manual MIG
- Wire feed
- Voltage and wire feed speed match automatically after wire diameter selection
- Display
- LED digital display; shows voltage, current, and other parameters
- Safety protection
- Overcurrent, overload, overheating, and overvoltage
- Body
- Rectangular inverter; top carry handle; side vent grille
- Controls
- Front panel with two rotary knobs
- Sockets
- Several brass sockets
- In the box
- Cable and clamp, torch cable, spool of wire, two small metal tips