Is the Garvee Life table saw good for a beginner?

It can work for a first saw if you check blade alignment and upgrade the fence. Budget saws often need setup tuning before cuts come out square. Expect to spend time on calibration rather than using it straight from the box.

Does it cut through 2-inch lumber?

A 10-inch blade gives roughly 3 inches of cut depth at 90 degrees, so 2-inch stock is within range. Hardwoods and wet lumber will slow the 15-amp motor, so take lighter passes.

Can it make bevel cuts?

Yes, the blade bevels for angled cuts. Check the bevel scale against a square before trusting it, since budget saws often read a degree or two off.

How does it compare with a DeWalt or Bosch benchtop saw?

Power is comparable at 15 amps, but the DeWalt and Bosch saws have better fences, rack-and-pinion adjustments and widely available parts. The Garvee competes on features per dollar, not on refinement.

What should I check first after assembly?

Check that the blade is parallel to the miter slot and that the fence locks square. Confirm the riving knife and guard are present and working before your first rip cut.