Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
GEEETECH PETG Metal is a 1.75mm PETG filament on a 1kg spool with a metallic pigment that gives prints a glossy, mirror-like sheen. PETG itself is tougher and less brittle than PLA, with good layer adhesion and moderate heat and UV resistance, so it suits mechanical parts and outdoor pieces as well as display models. The tight ±0.03mm diameter tolerance is the main spec to weigh against budget PETG, which often runs looser. Expect PETG's usual demands: slower speeds, more stringing control and a heated bed.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
This is a PETG 3D printer filament with a metallic color and a high-gloss finish. It is made for decorative models, cosplay props, functional prototypes, mechanical parts and outdoor applications.
The filament is formulated for layer adhesion and impact resistance. Its diameter tolerance is ±0.03 mm, which keeps extrusion consistent and helps reduce clogs. It works with most FDM 3D printers and needs no specialized hardware.
It comes on a 1 kg (2.2 lb) spool. For the best metallic finish, use the filament within 1 week of opening, or dry it at 176°F (80°C) for 4 to 6 hours before printing. Re-dry it as needed during extended storage.
