The Goodman GRVT800603BX is a two-stage, non-condensing gas furnace with a variable-speed ECM blower. It fires at 42,000 BTU input on low and 60,000 BTU on high, about 33,600 and 48,000 BTU of output, and carries an 80 AFUE rating for conventional metal-flue venting. The variable-speed blower ramps airflow up and down instead of kicking on at full tilt, which gives steadier temperatures and quieter starts than a single-stage furnace. It meets California's 40 ng/J Low NOx standard but is not Ultra-Low NOx, so buyers in strict air districts should check local rules. It suits homeowners replacing an 80 AFUE furnace who want two-stage comfort without paying for a condensing unit.
In stockReturn policy
Owners and installers rate it well overall, praising steady heat and quiet operation from the variable-speed blower. Complaints center on the cost of replacement parts and the limits of an 80 AFUE unit.
The Goodman GRVT800603BX is a two-stage, non-condensing natural gas furnace with a variable-speed ECM blower. The low stage uses 42,000 BTU of input and produces approximately 33,600 BTU of output. The high stage uses 60,000 BTU of input and produces approximately 48,000 BTU of output. The furnace can stay at its lower firing rate in moderate weather and move to full capacity when more heat is needed.
The variable-speed ECM blower raises or lowers airflow gradually based on system demand, instead of starting with a sudden rush of air. It supports continuous air circulation without running at maximum output every time. Maximum airflow is about 1,200 CFM, and it handles cooling systems from approximately 1.5 to 3 tons.
The furnace has an 80% AFUE rating and a 4-inch flue connection for an approved metal venting arrangement. It meets California's 40 ng/J Low NOx standard but is not classified as Ultra-Low NOx equipment. The 17.5-inch B-width cabinet is fully insulated heavy-gauge steel and can be positioned upflow or horizontal.







