Goulds 10HS15412CL 4" Submersible Well Pump and Motor Package, 1.5 HP
Best price now
$1,466.73at eBayChecked Nov 9
Compared across 2 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission.
Compared across 2 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Goulds 10HS15412CL is a 1.5 HP, 17-stage 4-inch submersible well pump and motor package for deep residential wells. Stainless steel casings, bowls, shafts and couplings resist corrosion, and glass-filled composite impellers and diffusers stand up to abrasion. A built-in spring-loaded check valve unscrews from the top of the discharge head, so it can be serviced or swapped for a drain-back setup without pulling the pump apart. It is a 3-wire, 230 V single-phase unit, so it needs an external control box that is not included. It suits deep-set wells and whole-house supply where a builder wants a proven stainless pump; against cheaper big-box pumps it trades a higher upfront outlay for heavier materials and easier service.
In stock
Availability unknownSold by dpumpdoctor (99.8% positive, 4,800 ratings)Returns: Set by the eBay seller; the eBay Money Back Guarantee covers an item that doesn't arrive or isn't as described.
Store links may earn us a commission.
Lowest price we've seen: $1,613.40 on Nov 10 at KG Power Systems. Tracked across 1 store since Nov 10.
This is a 4-inch submersible well pump and motor package with a 1.5 HP motor. It runs on 230-volt, single-phase, 60 Hz power, uses a 3-wire motor, and has 17 stages. The motor is a Goulds Water Technology 4-inch motor. A control box is not included.
The shafts, shaft couplings, casings and stage bowls are stainless steel, which inhibits corrosion. The impellers and diffusers are glass-filled engineered composite for abrasion resistance and durability. The motor adapter is nylon for strength and corrosion resistance.
A check valve is built into the pump. It screws into the discharge head from the top and can be removed for drain-back systems or replaced without disassembling the pump. Its spring-loaded, o-ring poppet design gives a positive seal in all conditions.
