It checks today's price at every store, compares the alternatives and answers in about a minute.
The RPS Core Series 25RPS15 is a 1.5 HP, 220V three-wire submersible well pump with a 4-inch pump end and a starter box. It is rated to 300 feet of total head and moves roughly 17 to 31 GPM depending on lift, so it suits household wells, livestock watering and small irrigation. The 304 stainless steel body and composite impellers are built for continuous duty, and it carries NSF drinking water and UL listings. Owners mostly report easy DIY installs and flow that matches the published curve, though some report early burnouts and kits arriving with missing or wrong parts.
In stock
Lowest price we've seen: $1,189.99 on Nov 10 at RPS Water Pumps. Tracked across 1 store since Nov 10.
Buyers rate it highly and mostly describe straightforward installs, strong flow and a solid, heavy build. A minority report pumps failing within a year or two, and several complain about incomplete or incorrect kit contents.
| Total Head | Gallons Per Minute (GPM) |
|---|---|
| No head | 31 |
| 25 feet | 31 |
| 50 feet | 31 |
| 100 feet | 31 |
| 125 feet | 31 |
| 150 feet | 30.5 |
| 175 feet | 29 |
| 200 feet | 27.5 |
| 250 feet | 24 |
| 300 feet | 17 |
The RPS Core Series 25RPS15 is a 25 GPM submersible deep well pump kit with a 1.5 HP, 220V, 3-wire single phase motor and a starter box. The starter box wires directly to a breaker or switch. The pump is for household wells, agriculture, irrigation and industrial use, and it can also pump from tanks or ponds.
The outer body is 304 stainless steel and the impellers are engineered composite. The housing is laser welded stainless, the stator is hermetically sealed, and a pressure equalizing diaphragm is included. The pump is NSF Drinking Water Certified and UL Listed.
The pump is built for continuous duty and is rated up to 300 feet of total head, with a flow of 17 to 31 GPM. It delivers 31 GPM from no head through 125 feet, 30.5 GPM at 150 feet, 29 GPM at 175 feet and 27.5 GPM at 200 feet. To find total head, add the well depth to the system pressure expressed in feet of head. It is meant to be used with a pressure tank.
