The Goulds GT15 IRRI-Gator is a compact centrifugal pump for irrigation, water transfer, and cooling loops. It is self-priming and resumes operation when water returns to the suction line. This reduces manual priming when water levels change.
The pump has a back-pullout design, so it can be taken apart for service without disturbing the piping. A two-compartment motor gives access to the wiring and replaceable components. The diffuser bolts down for alignment with the impeller and has a stainless wear ring for abrasive conditions.
The casing is cast iron with a corrosion-resistant electro-coat finish. The impeller and diffuser materials are FDA-compliant. A built-in overload with automatic reset supports continuous operation within rated limits. Common uses include lawn sprinkling, irrigation, air conditioning systems, heat pumps, water transfer, and dewatering.
- Connections
- 1½" NPT suction and discharge
- Capacity
- Up to 110 GPM at 5 ft suction
- Max head
- 128 ft
- Suction lift
- Up to 25 ft
- Max pressure
- 125 PSIG
- Water temperature
- Up to 140°F (60°C)
- Power
- Single-phase, 115/230 V, 60 Hz
- Speed
- 3500 RPM
- Casing
- Cast iron with electro-coat finish
- Wetted parts
- FDA-compliant alloys and glass-filled polymers
- Wear ring
- Stainless, in diffuser
- Protection
- Built-in overload with automatic reset
- Service
- Four-bolt back-pullout design
- Ports
- Threaded openings for gauge and drain