This is a 2.5-inch SATA hard drive enclosure with a grid-textured top and rounded corners. A Micro USB port and a small indicator light sit on one end. A USB cable with a USB-A plug and a Micro USB plug comes with it.
The enclosure takes 2.5-inch SATA drives that are 7.0 mm or 9.5 mm thick; drives 12.5 mm and 15 mm thick do not fit. It connects by Micro USB 3.0 on one end and a 7+15 SATA connection inside, with USB 3.0 transfer rates up to 5.0 Gbps. It is backward compatible with USB 2.0 and supports SATA 3.0, also backward compatible with SATA 2.0.
The drive is hot plug and plug and play, with no driver to install. After 3 minutes without activity it goes into a smart sleep mode and wakes when the drive is opened or data is transferred; after the drive is safely removed it sleeps immediately to protect its mechanical parts. Two LED indicators show power in blue and signal in green. UASP acceleration can raise SSD speed by approximately 10% to 20%, which requires Windows 8 or Windows 10, a SATA 3 SSD and a USB 3.0 interface.
- Type
- 2.5-inch SATA external hard drive enclosure
- Input
- Micro USB 3.0
- Output
- 7+15 SATA
- USB standard
- USB 3.0, backward compatible with USB 2.0
- Transfer rate
- Up to 5.0 Gbps
- SATA support
- SATA 3.0, backward compatible with SATA 2.0
- Drive thickness
- 7.0 mm and 9.5 mm; 12.5 mm and 15 mm not supported
- Features
- Hot plug, plug and play, no driver needed, UASP acceleration, 3-minute smart sleep
- UASP acceleration
- Approximately 10%–20% for SSDs; requires Windows 8 or 10, a SATA 3 SSD and a USB 3.0 interface
- Indicators
- Blue power light, green signal light
- Compatibility
- Windows XP/7/8/10, Vista, Mac OS 9/10, Linux
- In the box
- Data cable x1, color box x1
- Weight
- 130 g