This is a tower-style air purifier with a perforated front panel, a flat top, and a small side vent. A display on the upper front shows a PM2.5 reading, with a row of control buttons above it and a band around the top edge. It uses a 3-stage filtration system: a pre-filter, an H13 HEPA filter, and an activated carbon filter.
The purifier covers up to 1560 sq ft and refreshes the air 5 times per hour. It has three fan speeds—low, medium, and high—plus Auto Mode, which adjusts the fan speed based on real-time air quality. Five timer options are available: 2, 4, 6, 8, and 12 hours. At its lowest setting, noise is ≤15 dB.
The top has a fragrance sponge pad for essential oils. The filter cover is washable. A filter replacement reminder lights the FILTER indicator red and flashes when the filter reaches the end of its service life; holding the TIMER button for 3-5 seconds clears the flashing reminder.
- Type
- Air purifier
- Coverage area
- Up to 1560 sq ft
- Air refresh
- 5 times per hour
- Filtration
- 3-stage: pre-filter, HEPA filter, activated carbon filter
- Filter grade
- H13 HEPA
- Fan speeds
- 3: low, medium, high, plus Auto Mode
- Auto Mode
- Adjusts fan speed based on real-time air quality
- Timers
- 2, 4, 6, 8, 12 hours
- Noise level
- Lowest ≤15 dB
- Display
- Real-time PM2.5 air quality
- Air sensor
- Built-in, real-time PM2.5
- Design
- Tower-style; perforated front panel; flat top; side vent
- Fragrance pad
- Sponge pad for essential oils
- Filter cover
- Washable
- Filter reminder
- FILTER light flashes red when replacement is due
- Reminder reset
- Hold TIMER button for 3-5 seconds
- Weight
- 6.05 lb (2744 g)