

The Jet JJP-8BT is a benchtop jointer with an 8-inch cutting width and a 13-amp brushed motor spinning two high-speed steel knives at 9,000 RPM. It tilts the fence from 90 degrees to 45 degrees and takes up to 1/8 inch per pass, with a dust port and a sheet-metal outfeed table. It suits hobbyists and small shops that need to face and edge boards up to 8 inches wide without a floor-standing machine. Against benchtop rivals, it offers more width and motor power than most, but the straight-knife cutterhead and light sheet-metal table are the trade-offs; owner ratings are middling, with complaints about setup and finish quality.
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Store links may earn us a commission. Some prices via Klarna.
Lowest price we've seen: $725.99 on Nov 20 at Rockler Woodworking and Hardware. Tracked across 7 stores since Nov 20.
Owners rate the JJP-8BT around 3.3 out of 5. They like the width and power for the size, but many report setup trouble and uneven results out of the box.
The Jet JJP-8BT is a benchtop jointer with an 8 in. cutting width and a 1/8 in. cut depth. Its 13 Amp brushed motor runs at 9000 RPM and drives a straight-knife cutterhead with two high-speed steel blades. The cutterhead is 8-1/4 in. wide, and maximum stock removal is 1/5 in. at full width.
The fence tilts from 90 to 45 R, with angle adjustment up to 45 degrees. Depth is set with precision adjustment knobs. The outfeed table is sheet metal and measures 29 in. long. The jointer has a dust collection port and an integrated cord wrap.
The maximum workpiece thickness is 4-18/25 in. for planer cutting. The joint types are mortise and tenon and box joints. It is a corded electric tool that runs on 115 V.
It checks today's price at every store, compares the alternatives and answers in about a minute.




