Will it fit my car's trunk or hatch lip?

It is a universal clamp designed for trunk lids, hatchbacks, doors and rear gates. Check that your panel edge is thin enough for the clamp jaws and has a flat section for the bracket to grip.

Does it damage the paint?

The clamp is meant to grip without drilling, but any clamped mount can mark paint over time. Clean the lip before fitting and check the clamp pads.

Can I adjust the antenna angle?

Yes. The bracket has a multi-angle adjustment joint, and the included wrenches let you lock the angle in place.

What antenna connector does it use?

The bracket is a mount only. It does not include a coax cable or connector, so you supply the antenna stud and cable that match your radio.

Is it strong enough for highway driving?

It is built from heavy-duty stainless steel for structural support, but check the clamp tension regularly, especially with a tall or heavy whip antenna.

The bracket and the adjustment wrenches. Antenna, cable and radio are not included.

JNPOG Universal Heavy Duty Stainless Steel Vehicle Car Antenna Mount Bracket

Best price now

$21.81at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

JNPOG Universal Heavy Duty Stainless Steel Vehicle Car Antenna Mount Bracket

Best price now

$21.81at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $21.81 at Walmart on Nov 10.

Our take on the JNPOG Universal Heavy Duty Stainless Steel Vehicle Car Antenna Mount Bracket

This is a stainless steel clip-on bracket for mounting a mobile radio, CB or scanner antenna to a vehicle's trunk lid, hatch, door or rear gate. It uses a multi-angle adjustment joint so you can tilt the antenna for better reception, and it clamps on without drilling, which is its main advantage over fixed through-hole mounts. At about 7 oz and roughly 6 inches square, it is compact and low-profile. It suits drivers who want a removable, paint-safe antenna mount for occasional radio use rather than a permanent install.

Best forDrivers who don't want to drill holes in the bodyworkHam radio, CB and scanner users on cars, SUVs and trucksTemporary or removable antenna setups

Pros

Stainless steel construction resists corrosion
Clamps to trunk, hatch, door or gate edges without drilling
Multi-angle joint lets you aim the antenna
Compact and light at about 7 oz
Adjustment wrenches included for tightening

Cons

Clamp-style lip mounts can loosen on rough roads
No coaxial cable or antenna connector included
Fit depends on the thickness and shape of the panel lip
Stainless steel is strong but heavier than aluminum mounts

JNPOG Universal Heavy Duty Stainless Steel Vehicle Car Antenna Mount Bracket prices at every store

WalmartNew
In stockSold by BOKYANReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$21.81Free shippingChecked Nov 10
Visit Walmart

About the JNPOG Universal Heavy Duty Stainless Steel Vehicle Car Antenna Mount Bracket

This is a stainless steel antenna mount bracket for vehicles. It is made from corrosion-resistant stainless steel and clips onto trunk lids, hatchbacks, doors and rear gates without damaging the paint.

The bracket is compact, with a low-profile design. A multi-angle adjustment mechanism lets you aim a mobile radio antenna for the best reception. Adjustment wrenches are included for tightening and calibration.

It is used to mount antennas for ham radio, CB transceiver or scanner communication on off-road trucks, SUVs and passenger vehicles.

Material: Corrosion-resistant stainless steel
Color: Silver
Dimensions: 5.91 x 5.91 x 2.76 in (15 x 15 x 7 cm)
Weight: 7.05 oz (200 g)
Mounting spots: Trunk lids, hatchbacks, doors, rear gates
Adjustment: Multi-angle
Use with: Ham radio, CB transceiver and scanner antennas
In the box: Antenna mount bracket, adjustment wrenches

Specifications

color: SilverSource
size: 5.91" x 5.91" x 2.76"Source

Questions and answers

Will it fit my car's trunk or hatch lip?: It is a universal clamp designed for trunk lids, hatchbacks, doors and rear gates. Check that your panel edge is thin enough for the clamp jaws and has a flat section for the bracket to grip.
Does it damage the paint?: The clamp is meant to grip without drilling, but any clamped mount can mark paint over time. Clean the lip before fitting and check the clamp pads.
Can I adjust the antenna angle?: Yes. The bracket has a multi-angle adjustment joint, and the included wrenches let you lock the angle in place.
What antenna connector does it use?: The bracket is a mount only. It does not include a coax cable or connector, so you supply the antenna stud and cable that match your radio.
Is it strong enough for highway driving?: It is built from heavy-duty stainless steel for structural support, but check the clamp tension regularly, especially with a tall or heavy whip antenna.
What is in the box?: The bracket and the adjustment wrenches. Antenna, cable and radio are not included.
Where is the JNPOG Universal Heavy Duty Stainless Steel Vehicle Car Antenna Mount Bracket cheapest?: At Walmart, for $21.81, as of our latest check.