What compressor do I need for this sand blaster?

It runs at 60-110 PSI, so you need a compressor that holds that pressure while feeding a steady air volume. Small pancake or hobby compressors tend to run out of air; a larger tank and higher CFM output keep the blast consistent.

What comes in the box?

The 5-gallon tank with wheels and cushioned handle, the aluminum blast gun, an oil-water separator, four ceramic nozzles (3/32", 7/64", 1/8" and 9/64", with 9/64" pre-installed) and an 8-foot rubber hose.

What abrasive can I use in it?

It is built for dry abrasive media such as sand, glass bead or aluminum oxide. The oil-water separator is there to keep the media dry, which matters because damp abrasive clogs the nozzle and stops the flow.

How do the four nozzle sizes differ?

The smaller 3/32" and 7/64" nozzles concentrate the blast for detail work and use less air. The 1/8" and 9/64" sizes cover more area faster but demand more air from the compressor.

Is this the same as a blast cabinet?

No. It is an open pressurized blaster, so abrasive and dust escape into the air. A cabinet contains the media and is better for small parts indoors; this unit is for outdoor or well-ventilated work on larger surfaces.

Can it strip rust and paint from car panels?

Yes, that is its main job. It removes rust, paint and stains and works on curved surfaces and gaps, but keep the gun moving on thin sheet metal so you do not warp or pit the panel.

Where is the KFFKFF 5 Gallon Sand Blaster cheapest?

At Walmart, for $94.06, as of our latest check.

What do buyers say about the KFFKFF 5 Gallon Sand Blaster?

Rated 5 out of 5 from 1 ratings.

KFFKFF 5 Gallon Sand Blaster

Best price now

$94.06at WalmartChecked 7 h ago

Prices are checked against each store and labelled with when.

Visit Walmart

KFFKFF 5 Gallon Sand Blaster

Best price now

$94.06at WalmartChecked 7 h ago

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Lowest price today: $94.06 at Walmart (checked Nov 15, 2026).

Our take on the KFFKFF 5 Gallon Sand Blaster

The KFFKFF 5 Gallon Sand Blaster is a pressurized abrasive tank on rubber wheels with a cushioned handle, an aluminum one-hand blast gun, an oil-water separator and four ceramic nozzles. It runs at 60-110 PSI and comes with an 8-foot rubber hose, so it handles rust, paint and stain removal on flat, curved and hard-to-reach surfaces. The oil-water separator and four nozzle sizes set it apart from basic siphon blasters and bare tank kits, which usually leave you buying moisture control and spare tips separately. It suits home shops and small restoration jobs; it is not a cabinet-style blaster, so expect dust, media scatter and a need for protective gear.

Best forHome shop rust and paint removalRestoring car parts and farm equipmentBlasting curved panels and tight gapsOwners who want moisture control built in

Pros

Oil-water separator keeps abrasive dry for steadier flow
Four ceramic nozzles in 3/32", 7/64", 1/8" and 9/64" sizes
Aluminum gun is light and wears better than brass ball-valve guns
Rubber wheels and cushioned handle make it movable across a yard or shop
8-foot rubber hose reaches tight spots
Runs on a common 60-110 PSI compressor range

Cons

Needs a compressor that sustains high flow at 60-110 PSI; small units will struggle
5-gallon tank means frequent refills on large areas
Open blasting throws dust and media; you supply the respirator and hood
Ceramic nozzles wear out and are consumables
No deadman valve or foot control listed, so the gun is hand-triggered

KFFKFF 5 Gallon Sand Blaster prices at every store

WalmartNew
Availability unknownSold by Garvee
$94.06+ $39.00 shippingChecked 7 h ago
Visit Walmart

Also available at

WalmartCheck price at Walmart

KFFKFF 5 Gallon Sand Blaster price history

Lowest price we've seen: $94.06 on Nov 15 at Walmart. Tracked across 1 store since Nov 15.

About the KFFKFF 5 Gallon Sand Blaster

This 5-gallon sandblaster is built for surface treatment work at high pressure. It removes rust, paint and stains, polishes large areas, and can blast curved surfaces and hard-to-reach gaps.

An oil-water separator removes moisture to keep the abrasive dry for consistent blasting. The aluminum alloy gun is lightweight and works with one hand. It is more durable and wear-resistant than conventional brass ball valve spray guns. The tank has a durable steel build that resists rust and wear.

Four ceramic nozzles resist wear, heat and deformation, which helps limit abrasive blockages. The 3/32" nozzle size options are 3/32", 7/64", 1/8" and 9/64", and the 9/64" nozzle is pre-installed. Rubber wheels, a cushioned handle and a sturdy base make the unit easy to move and stable in use. An 8-foot flexible rubber hose reaches tight spaces, and a face shield protects against dust and airborne particles.

Model: FF-Q901
Tank capacity: 5 gallons / 18.92 L
Abrasive capacity: 2.8 gallons / 10.5 L suggested
Pressure: 60-110 PSI
Abrasive: 60-100 grit
Nozzles: 4 ceramic: 3/32", 7/64", 1/8", 9/64" (pre-installed)
Oil-water separator: Included
Gun: Aluminum alloy
Hose: 8 ft rubber blasting hose
Tank material: Steel
Wheel size: Ø5.9" x 1.2" / Ø150 x 31.5 mm
Dimensions: 13.4" x 13.6" x 30.3" / 340 x 345 x 770 mm
Weight: 24.7 lbs / 11.21 kg
In the box: 4 ceramic nozzles, 1 sandblasting face mask, 1 seal tape, 1 user manual

Specifications

color: OrangeSource
size: 5 galSource
Tank capacity: 5 GallonSource
Operating pressure: 60-110 PSISource

Questions and answers

What compressor do I need for this sand blaster?: It runs at 60-110 PSI, so you need a compressor that holds that pressure while feeding a steady air volume. Small pancake or hobby compressors tend to run out of air; a larger tank and higher CFM output keep the blast consistent.
What comes in the box?: The 5-gallon tank with wheels and cushioned handle, the aluminum blast gun, an oil-water separator, four ceramic nozzles (3/32", 7/64", 1/8" and 9/64", with 9/64" pre-installed) and an 8-foot rubber hose.
What abrasive can I use in it?: It is built for dry abrasive media such as sand, glass bead or aluminum oxide. The oil-water separator is there to keep the media dry, which matters because damp abrasive clogs the nozzle and stops the flow.
How do the four nozzle sizes differ?: The smaller 3/32" and 7/64" nozzles concentrate the blast for detail work and use less air. The 1/8" and 9/64" sizes cover more area faster but demand more air from the compressor.
Is this the same as a blast cabinet?: No. It is an open pressurized blaster, so abrasive and dust escape into the air. A cabinet contains the media and is better for small parts indoors; this unit is for outdoor or well-ventilated work on larger surfaces.
Can it strip rust and paint from car panels?: Yes, that is its main job. It removes rust, paint and stains and works on curved surfaces and gaps, but keep the gun moving on thin sheet metal so you do not warp or pit the panel.
Where is the KFFKFF 5 Gallon Sand Blaster cheapest?: At Walmart, for $94.06, as of our latest check.
What do buyers say about the KFFKFF 5 Gallon Sand Blaster?: Rated 5 out of 5 from 1 ratings.

Stores we've priced the KFFKFF 5 Gallon Sand Blaster at

Walmart deals and prices

More from KFFKFF

Stores we've priced the KFFKFF 5 Gallon Sand Blaster at

Walmart deals and prices

More from KFFKFF

Nozzle type

CeramicSource

Nozzle count

4Source

Oil-water separator

IncludedSource

Brand

GARVEE

Weight

28.84 lb

Dimensions

26.57 x 15.94 x 13.78 in

Has written warranty

No

Manufacturer

Garvee

KFFKFF 5-in-1 Wireless Weather Station with 7.5-Inch VA Display, Solar-Powered Outdoor Sensor, Rain Gauge, and Indoor/Outdoor Monitoring for Weather Forecast, Temperature,Humidity,Wind Speed(No WiFi)