How big a tree can it hold?

Krinner rates the Large for live trees up to 8 feet tall with a trunk up to 7 inches across. Taller or thicker trunks call for a bigger model.

Does it really work with one person?

Yes. You stand the tree in the stand, press the foot pedal to tighten the cable, then slide the pedal into the lock position. No screws or tools are involved.

How much water does it hold?

The reservoir holds about 1 gallon, and a float gauge shows the level. Large trees drink a lot, so check it daily.

Does it fit crooked trunks?

Yes. The cable tightens from all sides, so an uneven or leaning trunk is clamped straight rather than wobbling in a fixed socket.

Is assembly required?

No. It comes ready to use; you unfold the stabilizer feet and set the tree in.

How does it compare with a screw-in stand?

It is faster and needs no tools, and it holds awkward trunks better. A basic screw stand is lighter and smaller but usually takes two people and a centered trunk.

Where is the Krinner Tree Stand cheapest?

At Esbenshade's Garden Center, for $90.87, 24% under what the other stores charge, as of our latest check.

What do buyers say about the Krinner Tree Stand?

Rated 4.9 out of 5 from 186 ratings.

Where can I buy the Krinner Tree Stand?

11 stores we checked sell it, including Lowe's, Esbenshade's Garden Center, ThePaintStore.com, Fleet Farm, Walmart.

Krinner Tree Stand Price History: $90.87 at Esbenshade's Garden Center

What reviewers say

4.9 / 5186 ratings

Owners rate it very highly and mostly praise the one-person setup and the firm hold on awkward trunks. Complaints center on the pedal effort and the stand's size and weight.

What people mention

SetupPraisedOwners say one person can stand a tree and lock it without screws or a second set of hands.
GripPraisedThe single cable pulls evenly on thick, thin and crooked trunks, and trees stay upright.
Pedal effortMixedSome find the foot pedal easy; others say a tall, heavy tree needs a hard press to lock.
Water gaugePraisedThe visible level indicator makes it obvious when the reservoir needs refilling.
Size and weightCriticisedThe wide base and 13-lb weight make it awkward to move and store off-season.

From Krinner USA

Single-cable operation applies even pressure for a firm grip on trees up to 8 feet tall and 7 inches in diameter
Foot pedal locking: press until secure, then slide into lock position — no tools or screws needed
Built-in water level indicator shows when to refill the 1-gallon reservoir
Ratchet mechanism locks step by step, holding trees upright even with thick, thin, or crooked trunks
18-inch diameter, 13 lbs, heavy-duty design for long-lasting stability and simple storage
5 stabilizer feet for additional security; no assembly required

Sizing: Holds live trees up to 8 feet tall and up to 7 inches in trunk diameter
Returns: Damaged or defective items may be returned within 30 days of purchase for a replacement or full refund, shipping included; other returns are refunded less shipp
Shipping: Ships Monday through Saturday; orders placed before 2 PM EST normally ship the same day, otherwise the next day

About the Krinner Tree Stand

The Krinner Tree Genie Large is a Christmas tree stand for live trees up to 8 feet tall with trunks up to 7 inches in diameter. It uses a single-cable system that applies even pressure around the trunk. The ratchet mechanism locks step by step, so it holds trees that are thick, thin, or slightly crooked.

To set it up, place the tree in the stand and press the foot pedal until the tree is secure. Then slide the pedal into lock position. No tools or screws are needed, and no assembly is required. Five stabilizer feet add support to keep the tree upright.

The built-in water reservoir holds 1 gallon. A water level indicator shows when it needs refilling. The stand is 18 inches in diameter and weighs 13 pounds.

Tree height: Up to 8 feet
Trunk diameter: Up to 7 inches
Water capacity: 1 gallon
Diameter: 18 inches
Weight: 13 lbs
Locking: Foot pedal, single-cable ratchet
Stability: 5 stabilizer feet
Tree type: Live trees
Assembly: None required