Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai
Laguna
Laguna REVO 12|16 Midi Lathe

Laguna REVO 12|16 Midi Lathe

Last price we saw

$989.10at Taco Tools, last seen Nov 3

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

Our take on the Laguna REVO 12|16 Midi Lathe

The Laguna REVO 12|16 is a midi wood lathe with a 1 HP DC permanent-magnet motor, a cast iron bed, and a 12-½ inch swing over the bed. Its double-ended 1" x 8 TPI spindle lets you turn outboard, and the digital readout shows RPM so you can repeat speeds. It runs on 110V with a 15 amp breaker and covers 650–3500 RPM. It suits turners who want a benchtop-sized lathe with more power and capacity than a basic mini lathe.

Best forTurners upgrading from a mini latheBowl and platter work up to about 16 inches outboardSmall-shop turners who need a benchtop footprintBuyers who want a digital RPM readout
Pros
  • 1 HP DC motor holds speed under load better than typical ½ HP midi lathes
  • Cast iron bed adds mass and reduces vibration
  • Double-ended spindle allows outboard turning for larger diameters
  • Digital readout makes repeatable speed settings easy
  • 1" x 8 TPI spindle and MT2 taper fit common chucks and accessories
  • 110V, 15 amp power works on a standard shop circuit
Cons
  • 15.5 inches between centers limits long spindles
  • Fixed headstock means no sliding-head versatility
  • 125 lbs shipping weight makes it awkward to move alone
  • No variable speed below 650 RPM, which matters for large rough blanks
  • Premium price compared with entry-level midi lathes

Laguna REVO 12|16 Midi Lathe prices at every store

  • Taco ToolsCheck price at Taco Tools

Laguna REVO 12|16 Midi Lathe price history

Lowest price we've seen: $989.10 on Nov 3 at Taco Tools. Tracked across 1 store since Nov 3.

What reviewers say

Owners generally rate the REVO 12|16 well for its power, smooth running, and build quality at its size. Many mention the digital readout and outboard capability as reasons they chose it over cheaper midi lathes. Some note the low-end speed and the short bed as limits for big or long work.

Pros
  • Strong, quiet 1 HP motor for its class
  • Low vibration from the cast iron bed
  • Useful digital RPM readout
  • Outboard turning adds capacity
Cons
  • Minimum 650 RPM is fast for large rough blanks
  • Short 15.5-inch distance between centers
  • Heavier and pricier than basic midi lathes

Specifications

Lathe Type
Midi Lathe
Spindle Type
1" x 8 TPI Inboard & Outboard
Distance Between Centers
15.5 in
Swing Over Bed
12-½ in
Swing Over Cross Slide
9-½ in (Swing Over Banjo)
Spindle Bore Diameter
0.375 in
Compatible Material
Wood
Digital Readout (DRO)
Yes
Speed Range
650 – 3500 RPM (High)
Motor Horsepower
1 HP
Motor Phase
Single phase, Single phase (1PH)
Motor Type
DC Permanent Magnet Motor
Motor Speed
3500 rpm (maximum)
Power Source
Electric
Voltage
110V
Amperage
15 amp (recommended breaker size)
Frequency
60 Hz
Construction Material
Cast Iron (bed)
Bed Type
Cast Iron
Headstock Type
Fixed Headstock w/ Double Ended Spindle
Overall Dimensions
35.8 in x 14.6 in x 20.5 in
Weight
125 lbs (shipping)
Spindle Taper
MT2

Questions and answers

Is the Laguna REVO 12|16 worth it over a cheaper midi lathe?
If you turn bowls and want a 1 HP motor, cast iron bed, and digital readout, the extra cost buys smoother cuts and more outboard capacity. For spindle-only work on a tight budget, a smaller lathe will do.
Can it turn bowls larger than 12 inches?
Yes, outboard. Swing over the bed is 12-½ inches, but the double-ended spindle lets you mount a blank outboard for larger diameters, typically up to about 16 inches with the right accessory.
What is the lowest speed?
650 RPM in the high range. That is fast for large, unbalanced blanks, so rough out big pieces carefully or start with smaller stock.
What chuck and accessories fit it?
The spindle is 1" x 8 TPI inboard and outboard, and the taper is MT2, so most standard woodturning chucks, spur centers, and live centers fit.
What comes in the box?
The lathe ships with the bed, headstock, tailstock, and tool rest assembly. Chucks, tools, and a stand are usually sold separately, so confirm the bundle before ordering.
Does it need a special circuit?
It runs on 110V and Laguna recommends a 15 amp breaker. A dedicated circuit is a good idea if you share the shop with other tools.