Is this lathe good for a beginner?

Yes. It comes with a faceplate and three chisels, and the four speeds are simple to learn. Expect to sharpen the chisels before first use.

Small bowls are possible with the faceplate, but the 0.5 HP motor and fixed speeds limit it to modest blanks. Large or green blanks will bog it down.

Does it have variable speed?

No. Speed is set by moving the belt across four pulley steps: 885, 1245, 1715 and 2425 RPM. You stop the lathe to change it.

What comes in the box?

The lathe, one faceplate, three chisels and a hex wrench for setup and adjustments.

What power does it need?

Standard 110V, 60 Hz household power. The motor is rated 370W, or 0.5 HP.

How does it compare with a variable-speed lathe?

Variable-speed models let you dial in RPM while turning and usually have more power. This one is simpler and cheaper but less flexible for bowl work.

Where is the VEVOR Benchtop Wood Lathe cheapest?

At Walmart, for $242.90, as of our latest check.

What do buyers say about the VEVOR Benchtop Wood Lathe?

Rated 3.2 out of 5 from 5 ratings.

VEVOR Benchtop Wood Lathe

Best price now

$242.90at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

VEVOR Benchtop Wood Lathe

Best price now

$242.90at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

VEVOR discount codes →

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $242.90 at Walmart on Nov 10.

Our take on the VEVOR Benchtop Wood Lathe

The VEVOR MCS1000 is a 40-inch benchtop wood lathe with a 0.5 HP (370W) motor and four fixed spindle speeds from 885 to 2425 RPM. It ships with a faceplate, three chisels and a hex wrench, so a new turner can start on spindles and small bowls without buying extras. Its cast-style bed and bolted-down base are meant to keep vibration down at the higher speeds. Against variable-speed lathes from Jet or Wen, it trades stepless control for a simpler four-step pulley setup, which is the main trade-off buyers weigh.

Best forBeginners setting up a first latheSmall workshops and garagesSpindle turning: tool handles, legs, pensBudget-minded hobbyists who want a full accessory kit

Pros

40-inch bed handles longer spindles
Four speeds cover roughing through finishing cuts
Faceplate, three chisels and hex wrench included
0.5 HP motor is adequate for light to medium turning
Benchtop footprint fits a small shop

Cons

Fixed pulley speeds, no variable-speed dial
0.5 HP bogs down on large or green bowl blanks
Changing speeds means stopping and moving the belt
No digital readout or soft-start

VEVOR Benchtop Wood Lathe prices at every store

WalmartNew
In stockSold by VEVOR Distribution StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$242.90Checked Nov 10
Visit Walmart

What reviewers say

Owner feedback is limited, but turners describe it as a serviceable starter lathe for light spindle work. The common complaints are the step-pulley speed changes and the modest motor when turning bigger blanks.

What people mention

Motor powerMixedOwners say 0.5 HP is fine for spindles but struggles with large or wet bowl blanks.
Speed controlCriticisedChanging speeds requires stopping the lathe and moving the belt between four pulley steps.
StabilityPraisedThe bed and base stay steady with little wobble during normal turning.
AccessoriesMixedThe included chisels and faceplate get you started, but the chisels arrive dull.
ValuePraisedBuyers see it as a low-cost way to try woodturning before upgrading.

About the VEVOR Benchtop Wood Lathe

The VEVOR Benchtop Wood Lathe (model MCS1000) is a 40-inch lathe for woodturning. It has a 0.5 HP (370W) motor and four speed settings to suit different cutting needs.

It is built to give a stable working platform that limits shaking and wobbling. The accessory set includes a faceplate, three chisels and the wrenches and center points needed to get started.

Model: MCS1000
Motor power: 370W, 0.5 HP
Input voltage: 110V, 60 Hz
Spindle speed: 885 / 1245 / 1715 / 2425 RPM
Speed control: Four-speed adjustment
Max turning diameter: 14 in / 350 mm
Distance between centers: 40 in / 970 mm
Tool rest length: 11.81 in / 300 mm
Dimensions: 57.48 x 8.07 x 13.39 in / 1460 x 205 x 340 mm
Net weight: 50.71 lbs / 23 kg
In the box: 1 double open end wrench, 1 hex wrench, 1 tooth shape center point, 1 movable center point, 1 faceplate, 1 plastic handle, 1 plastic handwheel, 1 locking bolt, 3 chisels, 1 user manual

Specifications

color: MulticolorSource
size: 14" x 40"Source

Questions and answers

Is this lathe good for a beginner?: Yes. It comes with a faceplate and three chisels, and the four speeds are simple to learn. Expect to sharpen the chisels before first use.
Can it turn bowls?: Small bowls are possible with the faceplate, but the 0.5 HP motor and fixed speeds limit it to modest blanks. Large or green blanks will bog it down.
Does it have variable speed?: No. Speed is set by moving the belt across four pulley steps: 885, 1245, 1715 and 2425 RPM. You stop the lathe to change it.
What comes in the box?: The lathe, one faceplate, three chisels and a hex wrench for setup and adjustments.
What power does it need?: Standard 110V, 60 Hz household power. The motor is rated 370W, or 0.5 HP.
How does it compare with a variable-speed lathe?: Variable-speed models let you dial in RPM while turning and usually have more power. This one is simpler and cheaper but less flexible for bowl work.
Where is the VEVOR Benchtop Wood Lathe cheapest?: At Walmart, for $242.90, as of our latest check.
What do buyers say about the VEVOR Benchtop Wood Lathe?: Rated 3.2 out of 5 from 5 ratings.