This bifold interior door has a 2-panel design on 1 1/8" thick panels. The top panel is louvered and the bottom panel is raised. The louvers let air move through, which suits laundry rooms, utility closets and other closets.
The door is made of clear pine, which takes a stain finish. It has solid stiles (sides) and rails. There is a little room for trimming, but the tolerance is minimal, because too much trimming can affect the integrity of the door.
Actual door size is slightly less than the stated size to allow for proper installation. For example, a 24" wide by 80" high door measures 11-13/16" wide per panel by 79" high. To pick a size, measure the finished opening side to side, then top to bottom, after the Sheetrock is installed. A 60"W x 80"H opening, for example, takes two 30"W x 80"H bifold units.
- Material
- Clear pine
- Panel design
- 2 panels: louvered top, raised bottom
- Panel thickness
- 1 1/8"
- Construction
- Solid stiles and rails
- Finish
- Suited to a stain finish
- Actual size
- 24" x 80" door: 11-13/16" wide per panel, 79" high. 24" x 96" door: 11-13/16" wide per panel, 95" high
- Track
- Single-unit bifolds in 48", 60" and 72" widths share the same track
- In the box
- Overhead track and hardware for each unit