This is a magnetic embroidery hoop set for Brother Innov-is and Babylock embroidery machines. It has a solid metal bottom frame and separate square magnet blocks in place of a single-piece upper frame. The magnets hold fabric in place without the compression of a traditional hoop and leave no hoop marks. They grip heavier and thicker fabric and quilting items.
A soft coating on the metal bottom frame protects the fabric from scratches and keeps it from sliding during stitching. To fix the fabric after hooping, lift a magnet and straighten it, with no need to re-hoop. For zippers or uneven fabric, move the separate magnets to the side area to clamp the fabric.
Each hoop comes with a grid template for lining up the design. Place it over the stabilizer, attach the magnets to hold the fabric, and use the center lines to position the design. The separate magnet blocks also work for the floating technique. In that method only the stabilizer is hooped, and the item is attached on top with adhesive spray or sticky stabilizer.
- Type
- Magnetic embroidery hoop with square magnet blocks and metal frame
- Models
- SA431MK (EF61MK) small, SA432MK (EF62MK) regular, SA434MK (EF71MK) medium, 3in1-AMK set of all three
- Embroidery area
- SA431MK: 1 x 2.5 in (20 x 60 mm); SA432MK: 4 x 4 in (100 x 100 mm); SA434MK: 4 x 6.75 in (100 x 170 mm)
- Frame
- Solid metal bottom frame with soft coating
- Brother compatibility
- Innov-is SE725, SE700, SE625, SE600, PE535, SE630, SE400, PE550D, LB6800, LB5000, SE425, PE545, PE500, PE525, 950D, PE540D, SE350, SE270D, M380D, NS1750D, 1850D
- Babylock compatibility
- Aurora, Sofia 2, Verve
- In the box: SA431MK
- 1 hoop, 4 magnets, 1 grid template
- In the box: SA432MK
- 1 hoop, 6 magnets, 1 grid template
- In the box: SA434MK
- 1 hoop, 6 magnets, 1 grid template
- In the box: 3in1-AMK
- 3 hoops (SA431MK, SA432MK, SA434MK), 16 magnets, 3 grid templates