This magnetic embroidery hoop set is made for Brother embroidery machines. It uses separate magnets instead of a one-piece upper frame to hold fabric in place on a solid metal bottom frame.
The magnets hold a range of fabrics, including heavier and thicker fabric and quilting items, without leaving hoop marks. For fabric with zippers or uneven areas, the separate magnets can be moved to the sides to clamp it tighter. To straighten fabric that is already hooped, you pick up the nearby magnet and adjust it, without pulling on the whole fabric or re-hooping.
The metal bottom frame has a soft coating. It helps prevent scratches on the fabric and keeps the fabric from sliding during embroidery.
- Compatibility
- Brother Innov-is SE725, SE700, SE625, SE600, SE630, SE400, SE425, SE350, SE270D, PE535, PE550D, PE545, PE500, PE525, PE540D, LB6800, LB5000, 950D, M380D, NS1750D, 1850D
- Small hoop (SA431M)
- Also listed as EF61M; embroidery area 1 x 2.5 in (20 x 60 mm)
- Regular hoop (SA432M)
- Also listed as EF62M; embroidery area 4 x 4 in (100 x 100 mm)
- Medium hoop (SA434M)
- Also listed as EF71M; embroidery area 4 x 6.75 in (100 x 170 mm)
- Frame
- Solid metal bottom frame with soft coating
- In the box: SA431M
- 1 magnetic embroidery hoop, 4 magnets, 1 grid template
- In the box: SA432M
- 1 magnetic embroidery hoop, 6 magnets, 1 grid template
- In the box: SA434M
- 1 magnetic embroidery hoop, 6 magnets, 1 grid template
- In the box: 3in1-A
- 3 magnetic embroidery hoops (SA431M, SA432M, SA434M), 16 magnets, 3 grid templates