- Is the Makita BO6050J good for finishing work?
- Yes. The 5.5 mm orbit and low speed settings give a fine, swirl-free finish on bare wood and between coats. Use the upper speed range for stock removal and drop to the low end for final passes.
- Does it work with a shop vacuum?
- Yes. The dust port accepts standard extractor hoses, and most owners run it that way because the included bag fills quickly. A vacuum also keeps the pad clearer for a better finish.
- How does it compare with a 5-inch sander?
- The 6-inch pad covers more area per pass and the 750 W motor is stronger than most 5-inch models. The trade-off is weight and bulk, so a 5-inch sander is easier for vertical and overhead work.
- What comes in the box?
- The sander, a dust bag and a carry case. Abrasive discs are not included, so buy 6-inch hook-and-loop discs in the grits you need.
- Can it be used on walls or ceilings?
- It can, but the weight makes overhead work tiring. Keep sessions short or use a lighter 5-inch sander for vertical surfaces.
- Does it have a brushless motor?
- No. It uses a conventional 750 W AC motor, which is why it needs mains power. Expect routine brush checks over years of heavy use.
- Where is the Makita BO6050J cheapest?
- At The Home Depot, for $459.00, as of our latest check.
- What do buyers say about the Makita BO6050J?
- Rated 3 out of 5 from 9 ratings.