Makita Cordless Brushless 36V LXT 6-1/2-in. Track Saw with 18V Batteries, 2-Pack and 55-in. Guide Rail for Track Saws
Best price now
$887.99at Tool NutChecked Nov 11
Prices are checked against each store and labelled with when.
Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a Makita 36V LXT plunge track saw kit built around the XPS01Z saw, two 18V 5.0Ah batteries and a 55-inch guide rail. The brushless motor runs on two 18V packs in series and uses automatic speed change to hold torque through a cut, with a 2,500–6,300 RPM dial, soft start and electric brake. It cuts 2-3/16 inches deep at 90 degrees and bevels from -1 to 48 degrees with stops at 22.5 and 45. It suits trim carpenters, cabinet installers and remodelers who want table-saw straightness without hauling a table saw. Against corded track saws it trades unlimited runtime for battery freedom; against cheaper rail saws it adds a deeper cut and a wider bevel range.
In stockReturn policy
Owners of the XPS01 saw generally rate its cut quality and dust collection highly and like that it runs on their existing 18V packs. Complaints center on weight with two batteries and on the learning curve for setting up the rail and bevel accurately.
This kit pairs a Makita 36V LXT brushless 6-1/2-inch cordless track saw (XPS01Z) with two 18V LXT 5.0Ah batteries and a 55-inch aluminum guide rail. The saw runs on two 18V batteries (X2 LXT, 36V) and has a Makita-built brushless motor. Automatic speed change technology adjusts cutting speed and torque during the cut.
The saw rides on the guide rail for straight cuts with minimal tear-out. A slide lever on the saw base engages the rail during bevel cuts. The rail has rubber inserts. A built-in depth stop allows a first cut of 2 to 3 mm before cutting through the material, for clean, splinter-free results.
A dial sets the speed from 2,500 to 6,300 RPM. Electronic speed control holds speed under load, and the saw has a soft start and an electric brake. It has a rubberized soft grip handle, a plunge release lever, and a depth adjustment with a large scale. An on-board hex wrench and a blade lock lever make blade changes easier. The rear dust port connects to a vacuum system.
