Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Makita SP6000J1 is a corded plunge saw built around a 1,300W overload-protected motor with constant electronics that hold speed under load. It comes as a kit with two 1.5m guide rails, rail connectors and a storage case, so a full track setup is in the box. It cuts up to 55mm at 90 degrees and 39mm at 45 degrees, bevels from -1 to 48 degrees with positive stops, and can score 2mm before a full-depth cut. It suits cabinet makers, kitchen fitters and trim carpenters who need straight, splinter-free cuts without clamping on most surfaces. Against rival plunge saws it is known for a smooth, stable rail and clean cuts, though it is corded and heavier than compact cordless models.
In stockShips from abroad · duties may applyReturn policy
Owners rate it highly, praising clean, accurate cuts straight from the rail and the smooth, stable feel of the saw. Complaints are few and mostly about weight and the cord.
The Makita SP6000J1 is a plunge saw supplied with two 1.5 m guide rails, rail connectors and a Systainer storage case with an inlay for the saw. The saw runs along the rail to cut a precise straight line, whether ripping or crosscutting. It can also plunge into the material for cut-outs.
The rails have a replaceable anti-splinter strip for a clean cut. Anti-slip strips on the underside mean the rail does not need clamping on most surfaces, though additional rail clamps are available. Top running strips let the saw glide smoothly.
A 1,300 W motor with overload protection drives the saw. Constant electronics maintain speed under load, and a variable speed dial sets the speed for the material being cut. Cutting height and angle are set with thumb screws, with positive stops at -1°, 22.5° and 45°. A 2 mm scoring cut can be made before the full-depth cut. The saw is manufactured in the UK at the Makita factory in Telford.
