A half-face mesh mask for cycling and other outdoor sports. The outer is a woven mesh with black trim around the edges, a molded nose piece with a stud at the bridge, and two round plastic exhaust valves on the front. Thin elastic loops sit at the top edges, and hook-and-loop tape adjusts the fit.
The valves turn counterclockwise to unlock so the filter can be changed. Each filter has layers of waterproof nonwoven polypropylene, activated carbon, a cotton prefilter and an electrostatic meltblown layer. Replace the filter every 3 to 30 days depending on pollution levels, or when the inner layer turns grey.
The mask measures 14 inches long by 6 inches high and weighs 1.5 ounces with a filter. The strap adjusts to head circumferences of about 20 to 25 inches. The mesh mask and valves can be soaked in warm water with detergent, rinsed and air dried.
- Material
- Nylon spandex and polyester mesh; plastic valves
- Fit
- One size, adjustable hook-and-loop strap
- Dimensions
- 14 in length x 6 in height
- Head Fit
- 20 to 25 in circumference
- Weight
- 1.5 oz (43 g) with filter
- Valves
- 2 plastic exhaust valves
- Nose Piece
- Plastic and metal, adjustable
- Filter
- Activated carbon, waterproof nonwoven, cotton prefilter, meltblown layer
- Filter Life
- 3 to 30 days
- Care
- Soak in warm water and detergent, rinse, air dry