
Milwaukee M12 2408-20 Cordless Hammer Drill/Driver
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Milwaukee M12 2408-20 is a subcompact 12 V hammer drill/driver built for tight spaces and light masonry work. It delivers up to 275 in-lb of torque with two speed ranges, 0-400 and 0-1,500 rpm, in a body about 7-1/2 inches long. An all-metal single-sleeve ratcheting chuck, an on-board fuel gauge and a built-in LED set it apart from most 12 V drills, which often use plastic chucks and skip the hammer mode. It suits electricians, cabinet installers and maintenance techs who want one small tool for drilling, driving and the occasional anchor hole; it is not a substitute for an 18 V rotary hammer on concrete.
In stockShips from Canada · duties may apply
Owners rate the 2408-20 highly as a compact, well-built 12 V drill with a metal chuck that most subcompacts lack. The common complaint is that the bare tool needs Milwaukee's M12 batteries, and that hammer mode only handles light masonry.
The M12 cordless hammer drill/driver is a subcompact hammer drill and driver that runs on a 12 V DC Li-Ion battery. It produces 275 in-lb of torque and turns at 0 to 400 or 0 to 1500 rpm, with 22,500 blows per minute for hammer drilling. The battery is sold separately.
The chuck is an all-metal, single-sleeve ratcheting type that holds the bit. An on-board battery gauge displays remaining run time, and a built-in LED light illuminates the work area. The tool is 7-1/2 in long, with an ergonomic handle, a metal housing and a trigger switch.
It checks today's price at every store, compares the alternatives and answers in about a minute.













