What is a 24-tooth blade best for?

Ripping: cutting along the grain or slicing sheet goods into strips. The low tooth count clears chips quickly. For smooth crosscuts or trim, a 60-tooth or higher blade is the better pick.

Will it fit my table saw?

It fits saws with a 10-inch blade capacity and a 5/8-inch arbor, which covers most US table saws and radial arm saws. Check that your saw's no-load speed does not exceed 5,500 rpm.

Yes, but feed slowly. A 24-tooth rip blade cuts hardwood along the grain well; across the grain it will tear out more than a fine-tooth blade.

Is it carbide-tipped?

No. The teeth are alloy steel on a 65Mn body. That means a lower upfront cost but faster dulling than carbide, and it can be sharpened by a saw shop.

One 10-inch, 24-tooth circular saw blade. No bushings or adapters are listed, so confirm your arbor size before buying.

Muvitrix Circular Saw Blade, 10 Inch, 24T, 5/8 Inch Arbor

Best price now

$30.56at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Muvitrix Circular Saw Blade, 10 Inch, 24T, 5/8 Inch Arbor

Best price now

$30.56at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $30.56 at Walmart on Nov 10.

Our take on the Muvitrix Circular Saw Blade, 10 Inch, 24T, 5/8 Inch Arbor

The Muvitrix is a 10-inch rip blade with 24 alloy teeth and a 5/8-inch arbor, built for fast, rough cuts in plywood, OSB and hardwood. Its 65Mn steel body is 0.098 inch thick and rated to 5,500 rpm, with heat vents cut to reduce noise. It is a general-purpose ripping blade for table saws and radial arm saws, not a fine-finish crosscut blade. Against carbide-tipped blades it will dull sooner and leave a rougher edge, but it suits framing, decking and shop ripping where speed matters more than a polished cut.

Best forRipping lumber on a 10-inch table sawFraming, decking and rough carpentryCutting plywood and OSB sheetsBudget-minded workshop and jobsite use

Pros

24 teeth clear waste fast in rip cuts
5/8-inch arbor fits most 10-inch table and radial arm saws
Rated to 5,500 rpm, covering common saw speeds
Heat vents help with noise and blade temperature
Thin 0.098-inch body takes a narrow kerf

Cons

24 teeth leave a rough edge on crosscuts and finish work
Alloy teeth dull faster than carbide and can be sharpened less often
Not suited to hardwoods at high feed rates
No thin-kerf or anti-kickback details spelled out

Muvitrix Circular Saw Blade, 10 Inch, 24T, 5/8 Inch Arbor prices at every store

WalmartNew
In stockSold by ToyHavenReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$30.56Free shippingChecked Nov 10
Visit Walmart

About the Muvitrix Circular Saw Blade, 10 Inch, 24T, 5/8 Inch Arbor

This is a 10 inch circular saw blade for cutting wood, including plywood, OSB, and hardwood. It has 24 alloy teeth and a rip blade design. The fine finish design supports precise cuts.

The blade is made from 65Mn steel and is 0.098 inch thick. Noise-reducing heat vents are designed to help keep operation quieter and more secure. It has a 5/8 inch arbor and a maximum speed of 5500 rpm.

Use it for home improvement, workshop cutting, and general wood processing with compatible circular saws.

Diameter: 10 inch
Teeth: 24T, alloy
Arbor: 5/8 inch
Blade material: 65Mn
Thickness: 0.098 inch
Max speed: 5500 rpm
Blade type: Rip blade, fine finish
Suitable for: Plywood, OSB, hardwood
Model number: 254*2.5*15.875-24T
In the box: 1 blade

Specifications

size: 10"Source

Questions and answers

What is a 24-tooth blade best for?: Ripping: cutting along the grain or slicing sheet goods into strips. The low tooth count clears chips quickly. For smooth crosscuts or trim, a 60-tooth or higher blade is the better pick.
Will it fit my table saw?: It fits saws with a 10-inch blade capacity and a 5/8-inch arbor, which covers most US table saws and radial arm saws. Check that your saw's no-load speed does not exceed 5,500 rpm.
Can it cut hardwood?: Yes, but feed slowly. A 24-tooth rip blade cuts hardwood along the grain well; across the grain it will tear out more than a fine-tooth blade.
Is it carbide-tipped?: No. The teeth are alloy steel on a 65Mn body. That means a lower upfront cost but faster dulling than carbide, and it can be sharpened by a saw shop.
What is in the box?: One 10-inch, 24-tooth circular saw blade. No bushings or adapters are listed, so confirm your arbor size before buying.
Where is the Muvitrix Circular Saw Blade, 10 Inch, 24T, 5/8 Inch Arbor cheapest?: At Walmart, for $30.56, as of our latest check.