Mytee 2008CS Contractor's Special 220PSI Heated Extractor Package

A heated carpet and upholstery package, ready to clean.

A 2,000 watt heated, dual-vacuum extractor with a 220 PSI pump, packaged with a 25' hose combo, a 12" wand, an Air Lite tool and System Maintainer.

Carpet and upholstery kit

Ships with the 8100 25' hose set, the 8300-EZ 12" wand, the 8400P Air Lite tool and System Maintainer.

4 accessories included

Hot water for grease

The 2,000 watt in-line heater brings water up to 210°F.

2,000 watt in-line heater

Two vacuums for recovery

Dual 3-stage low-amp vacuum motors clean and dry carpet.

130" water lift

What it is

The Mytee 2008CS Contractor's Special is a heated portable carpet extractor package for carpet and upholstery cleaning and hard-surface extraction. The extractor pairs a 2,000 watt in-line heater (210°F maximum) with a 220 PSI diaphragm demand pump (1.35 GPM) and dual 3-stage low-amp vacuum motors rated at 200 CFM and 130" of water lift. It ships with a 25' hose combo, a 12" dual jet wand, an 8400P Air Lite upholstery tool and a gallon of System Maintainer descaler.

Tanks and filling

Its solution and recovery tanks hold 10 gallons each. The solution tank fills from a faucet with the faucet fill hose, and a prime valve sits on the solution line. Contractor's Special packages are designed for routine carpet maintenance in offices, schools, residences and more, and Mytee pre-assembles them so the wand, hose and connections already match the extractor.

Power and circuits

The 2008CS runs on two detachable 50' 12/3 twist-lock power cords. Cord 1 draws 20 A and cord 2 draws 18 A at 115 V, and dual cord units need two separate circuits. For an unheated package on one cord, see the 2005CS.

Moving it

10" foam-filled, non-marking re