
Navien NPE-210S2 High Efficiency Condensing Tankless Water Heater
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Navien NPE-210S2 is a condensing tankless water heater rated 12,000–180,000 BTU/h on natural gas or propane, with dual stainless steel heat exchangers and a UEF of 0.96. It is the NPE-210A2 without the internal recirculation pump, which is why it earns the higher efficiency rating. It modulates down to 12,000 BTU/h and fires at 0.5 GPM, so it handles a hand wash as well as a shower. It suits homes that want high efficiency and whole-house capacity without paying for built-in recirculation; buyers who want instant hot water at the tap should look at the A2 instead.
In stockReturn policy
The Navien NPE-210S2 is a condensing tankless water heater from the NPE-2 series. It uses the same cabinet and the same pair of stainless steel heat exchangers as the NPE-210A2, but has no internal pump. That is why it carries the higher efficiency rating of the two.
It is rated at 12,000 to 180,000 BTU/h on natural gas or propane and is certified for both. The burner modulates down to 12,000 BTU/h, so it does not run at full fire to fill a sink. Minimum activation flow is 0.5 GPM, so it fires for a hand wash as well as a shower.
Output depends on temperature rise: the colder the incoming water, the less one burner can heat. At a 67°F rise it delivers 5.3 GPM, enough for roughly 2 showers at once with 2.5 GPM showerheads. Size to the 67°F rise if your winter groundwater runs cold. Gas connection, venting and condensate disposal must be done by a licensed installer, to the Navien manual and local code.














