Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The NDS Spee-D Channel Drain is a 10-foot pre-sloped trench drain made of high-density polyethylene for surface water in driveways, patios and pool decks. Its 3-inch channel and 5-inch overall width put it in the light-duty class, and the pre-sloped floor helps water run to the outlet without hand-grading the trench. It interlocks with more Spee-D sections for longer runs, and grates are sold separately. Compared with concrete or cast-iron trench drains, it is lighter and easier to cut and set, but it carries less load and needs the right grate for the traffic over it.
In stockReturn policy
Owners of plastic channel drains like this one generally report that the pre-sloped sections install quickly and handle runoff from patios and driveways. Complaints tend to center on the extra cost of grates and fittings and on the load limits of a plastic channel.
The NDS 400-10 Spee-D Channel Drain is a 10-foot surface drainage channel for residential and light commercial use. It is meant for areas where water collects, such as driveways, patios and pool decks.
It is made of UV-resistant, high-density polyethylene. The channel is pre-sloped to move water along. Sections interlock, so several channels can be connected. It works with various grate options, which are sold separately.
For installation, the channel is set in a trench on a 1-inch compacted gravel base, starting from the lowest point. It is secured with concrete or landscaping spikes, and concrete is poured around the sides. The top of the concrete sits 1/8 inch below the grate surface.
