

Prices are checked against each store and labelled with when.
The NICE-POWER is a compact adjustable DC bench supply rated 150W, with two working ranges: 15V at up to 10A, or 30V at up to 5A. You set voltage and current with encoder knobs, pressing to pick a digit and turning to change it, and a 3-digit LED shows voltage to 0.1V and current to 0.01A. A fan switches on once internal temperature reaches 50°C, and overload, over-temperature and short-circuit protection are built in. It suits hobbyists, repair techs and small labs doing LED tests, electroplating and DIY work; against linear supplies it is lighter and cheaper to run, but the 150W ceiling and the linked voltage/current ranges limit it next to higher-wattage switchers.
In stockSold by KUAIQUReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Rated 4.3 out of 5 from 31 ratings, buyers generally find it does the job for hobby and bench work. Complaints center on the shared power ceiling and the basic display.
This is a variable DC bench power supply rated at 150W. It switches between two modes: 15V at 10A and 30V at 5A. In the 10A mode the voltage stays at or below 15V, and in the 30V mode the current stays at or below 5A.
A three-digit LED screen shows voltage and current as they run, with voltage read to 0.1V and current to 0.01A. To set a value, press the voltage or current encoder knob to choose the digit, then turn the knob to select a number from 0 to 9.
The cooling fan starts on its own when the operating temperature reaches 50°C. Built-in overload, over-temperature and short-circuit protection guard the connected equipment. The unit is used for LED testing, electronics repair, DIY projects, research, aging tests, model hobby work and electroplating.
It checks today's price at every store, compares the alternatives and answers in about a minute.






