

Prices are checked against each store and labelled with when.
The NICE-POWER SPS3010 is a benchtop DC power supply with adjustable output from 0 to 30V and 0 to 10A, up to 300W, plus a fixed 5V/2A USB port. It runs in constant-voltage or constant-current mode, shows voltage and current on a 4-digit LED display at 0.01 resolution, and packs overvoltage, overcurrent, overheat, overpower, short-circuit and leakage protection into an all-metal case about 9.4 by 5.9 by 3.3 inches. A temperature-controlled fan stays off until the unit reaches 50°C, so it runs quietly at light loads. It suits electronics hobbyists, repair techs, battery charging and small lab or production benches. Against fancier lab supplies it gives up programmability, memory presets and remote control, but it covers the everyday voltage and current range at a lower tier of build and features. Owners rate it 4.7 out of 5 across 33 ratings.
In stockSold by KUAIQUReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Owners rate it 4.7 out of 5 and generally find it a solid, quiet bench supply for hobby and repair work. Complaints center on fine adjustment and display precision rather than reliability.
The NICE-POWER SPS3010 is a benchtop DC power supply that works as either a regulated voltage source or a regulated current source. Its output is adjustable from 0 to 30 V and 0 to 10 A, for up to 300 W. A 5V/2A USB port lets you charge a phone, tablet or other device.
The body is all metal and measures 9.4" x 5.9" x 3.3", in a compact, portable build. A cooling fan runs at low noise and low consumption, switching on automatically when the temperature reaches 50°C. Settings and readings appear on a 4-digit LED display, with voltage resolution of 0.01 V and current resolution of 0.01 A.
Protection covers overvoltage, overcurrent, overheating, overpower, short circuit and leakage. Because the supply has an adjustment delay, turn it on and set the voltage and current before connecting the load. When setting current, first bring the voltage below 3 V, connect the positive and negative output wires, then set the current you want. Turn the unit off and unplug the power cord when it is not in use, and unplug it before cleaning.
It checks today's price at every store, compares the alternatives and answers in about a minute.

