Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai
Norco
Norco 1,250 Lbs. Capacity Engine Stand, 75:1 Gear - 78155

Norco 1,250 Lbs. Capacity Engine Stand, 75:1 Gear - 78155

Last price we saw

$1,220.00last seen Oct 28

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

Our take on the Norco 1,250 Lbs. Capacity Engine Stand, 75:1 Gear - 78155

The Norco 78155 is a heavy-duty engine stand rated for 1,250 lbs, aimed at shops and serious home mechanics pulling and holding V8s and large diesel blocks. Its 75:1 hand-crank gearbox turns a 360-degree rotating head, so one person can flip an engine without wrestling it. The telescopic base locks into four positions, extending from 38.25 to 53.25 inches for stability with long blocks. It weighs 179 lbs and rolls on polyurethane wheels.

Best forHome mechanics rebuilding V8 or diesel engines
Small shops that need a stable, high-capacity stand
One-person engine teardowns and rotations
Buyers who want a geared crank instead of manual rotation
Pros
  • 1,250 lb capacity handles big V8s and many diesel blocks
  • 75:1 hand-crank gearbox makes rotating a heavy engine manageable
  • 360-degree rotating head with fully adjustable mounting arms
  • Telescopic base locks in four positions for a wider footprint
  • Polyurethane wheels roll smoothly on concrete
Cons
  • 179 lbs bare weight makes it hard to move alone
  • Tall 42-inch height and long base take up shop space
  • Hand crank is slower than a hydraulic or motorized rotator
  • No wheel locks listed, so it can creep on sloped floors

Norco 1,250 Lbs. Capacity Engine Stand, 75:1 Gear - 78155 price history

Lowest price we've seen: $1,220.00 on Oct 28. Tracked across 1 store since Oct 28.

What reviewers say

Owners of Norco engine stands generally report solid welds and stable holding of heavy blocks. The geared crank is the feature most often called out as a back-saver. Some note the stand is heavy to reposition and that the crank takes many turns per revolution.

Pros
  • Sturdy build that holds heavy engines without flex
  • Geared crank makes rotating big blocks easy for one person
  • Wide adjustable base adds stability
Cons
  • Heavy and awkward to move around the shop
  • Crank requires many turns to rotate the engine
  • Mounting arms can be fiddly to align on some bellhousings

Specifications

Capacity
1,250 lbs
Height
42in
Width Front
21.25in
Width Rear
40in
Length From
38.25in
Length To
53.25in
Weight
179 lbs
Gear Ratio
75:1
Gearbox Activation
hand crank
Rotating Head
360-degree
Engine Mounting Head
fully adjustable
Wheel Type
polyurethane
Base Extension
telescopic, locks into four positions

Questions and answers

Is the Norco 78155 worth it over a cheaper 1,000 lb stand?
If you regularly pull V8s or diesel blocks, the extra 250 lbs of capacity and the 75:1 crank justify the cost. For four-cylinder engines, a lighter and cheaper stand is enough.
Will it hold a big-block Chevy or a Cummins?
A big-block Chevy is well within the 1,250 lb rating. Many Cummins 6BT blocks are close to the limit once dressed, so check your engine's wet weight before mounting.
How hard is it to turn the crank?
The 75:1 ratio means roughly 75 crank turns per full rotation of the engine, so it is slow but low-effort. Expect several minutes to flip a heavy engine end to end.
What is the footprint when extended?
The base runs from 38.25 to 53.25 inches long and up to 40 inches wide at the rear. Plan for clear floor space around it, especially when the engine is rotated.
Does it come with mounting arms and hardware?
It ships as a stand with an adjustable mounting head and arms. Confirm the arm and bolt kit for your engine's bellhousing pattern before ordering.
When is it cheapest?
Engine stands tend to dip during holiday sales and shop-equipment promotions. Track the price history here and buy when it drops below its recent range.