What is the Norco 10 Ton Cylinder used for?

It is a hydraulic ram for lifting, pushing, pulling, bending and holding in shop, agricultural, automotive, truck service and construction maintenance work. It is a general-purpose cylinder, not a dedicated porting or toe jack ram.

How much stroke does it have and how tall is it?

It has a 12-inch stroke, with a minimum height of 15.75 inches and a maximum height of 27.75 inches. Check the collapsed height fits your application before buying.

Does it come with a coupler?

Yes. A high-flow quick-connecting coupler and dust cap are included on all models. You still need a compatible pump and hose to operate it.

How does it handle off-center loads?

The piston and cylinder bearings are designed to absorb eccentric load stresses, protecting the cylinder from abrasion, over-extension and jamming. Keep loads as centered as practical for best seal life.

What is the oil capacity?

The oil capacity is 26.76 cubic inches. The cylinder ships at 16.5 lbs.

Does it meet any standards?

Norco states the cylinders comply with ANSI B 30.1. That covers the cylinder itself; the pump and hose you pair it with are separate.

Where is the Norco 10 Ton Capacity Cylinder (12" Stroke) cheapest?

At Walmart, for $923.55, as of our latest check.

Norco 10 Ton Capacity Cylinder (12" Stroke)

Best price now

$923.55at WalmartChecked Nov 12

Compared across 2 stores. Prices are checked against each store and labelled with when.

Visit Walmart

Norco 10 Ton Capacity Cylinder (12" Stroke)

Best price now

$923.55at WalmartChecked Nov 12

Compared across 2 stores. Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $923.55 at Walmart on Nov 12.
Checked at 2 stores.

Our take on the Norco 10 Ton Capacity Cylinder (12" Stroke)

The Norco 10 Ton Capacity Cylinder is a hydraulic ram with a 12-inch stroke, built for lifting, pushing, pulling, bending and holding in shop, agricultural, truck service and construction work. Its piston and cylinder bearings absorb eccentric loads to protect against abrasion, over-extension and jamming, and polyurethane seals and wipers are rated for long cycle life. Nickel-plated pistons and a baked enamel exterior resist rust and corrosion. It suits mechanics and maintenance crews who need a rugged general-purpose ram rather than a lightweight porting cylinder.

Best forAuto and truck service shopsFarm and agricultural repairConstruction maintenanceBody, frame and structural bending work

Pros

Piston and cylinder bearings handle off-center loads
Polyurethane seals and wipers for long cycle life
Nickel-plated piston and baked enamel body resist rust
Heavy duty return springs for consistent retraction
High-flow quick coupler and dust cap included
Meets ANSI B 30.1

Cons

Heavy at 16.5 lbs for a 10-ton ram
12-inch stroke needs more headroom than short-stroke rams
Return springs add effort when retracting by hand
No built-in gauge or overload protection

Norco 10 Ton Capacity Cylinder (12" Stroke) prices at every store

WalmartNew
In stockSold by empire lube equipment llc
$923.55Free shippingChecked Nov 12
Visit Walmart
WalmartNew
In stockSold by empire lube equipment llcReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$923.55Free shippingChecked Nov 12
Visit Walmart

Norco 10 Ton Capacity Cylinder (12" Stroke) price history

Lowest price we've seen: $923.55 on Nov 12 at Walmart. Tracked across 1 store since Nov 12.

About the Norco 10 Ton Capacity Cylinder (12" Stroke)

The Norco 10 Ton Capacity Cylinder is a hydraulic cylinder with a 12-inch stroke. It is used for lifting, pushing, pulling, bending or holding in shops, agriculture, automotive and truck service, and construction maintenance.

A high flow quick connecting coupler and dust cap are included. Unique piston and cylinder bearings absorb eccentric load stresses to protect the cylinder against abrasion, over-extending and jamming. Polyurethane seals and wipers provide high cycle life, and heavy duty return springs provide consistent performance.

Nickel plating on most cylinder pistons inhibits rusting. The exterior has a baked enamel finish for increased corrosion resistance. The cylinder complies with ANSI B 30.1.

Capacity: 10 ton
Stroke: 12 in
Minimum height: 15.75 in
Maximum height: 27.75 in
Oil capacity: 26.76 cu. in.
Weight: 16.5 lbs
Coupler: High flow quick connecting coupler with dust cap
Seals: Polyurethane seals and wipers
Finish: Baked enamel exterior; nickel-plated piston on most cylinders
Standard: Complies with ANSI B 30.1

Specifications

color: OtherSource

Questions and answers

What is the Norco 10 Ton Cylinder used for?: It is a hydraulic ram for lifting, pushing, pulling, bending and holding in shop, agricultural, automotive, truck service and construction maintenance work. It is a general-purpose cylinder, not a dedicated porting or toe jack ram.
How much stroke does it have and how tall is it?: It has a 12-inch stroke, with a minimum height of 15.75 inches and a maximum height of 27.75 inches. Check the collapsed height fits your application before buying.
Does it come with a coupler?: Yes. A high-flow quick-connecting coupler and dust cap are included on all models. You still need a compatible pump and hose to operate it.
How does it handle off-center loads?: The piston and cylinder bearings are designed to absorb eccentric load stresses, protecting the cylinder from abrasion, over-extension and jamming. Keep loads as centered as practical for best seal life.
What is the oil capacity?: The oil capacity is 26.76 cubic inches. The cylinder ships at 16.5 lbs.
Does it meet any standards?: Norco states the cylinders comply with ANSI B 30.1. That covers the cylinder itself; the pump and hose you pair it with are separate.
Where is the Norco 10 Ton Capacity Cylinder (12" Stroke) cheapest?: At Walmart, for $923.55, as of our latest check.