Prices are checked against each store and labelled with when.
A 12V electric transfer pump that clips to a car battery and moves oil or diesel through two hoses. It is built for draining engine oil, gear oil and similar fluids without a drain plug, and for moving diesel between tanks. Flow is slow for thick oil at roughly 0.8–1.0 L/min, but much faster for diesel at about 250 L/hour. It suits home mechanics doing their own fluid changes; manual vacuum extractors and hand pumps cost less effort per job but need pumping, while this one runs off the battery.
In stockSold by MingrenReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is an electric transfer pump that runs on a 12V DC power supply and is used to move oil or diesel out of a vehicle or machine during a fluid change. It is made of plastic and aluminium in a black and yellow body measuring 8" x 7" x 4".
The pump draws 5A at 60W and connects to a battery with the two included battery clamps. An inlet hose pulls the fluid in and an outlet hose carries it out, with hose clamps supplied to secure both connections.
Flow rate is approximately 0.8–1.0 L/min for motor oil at 40–60 degrees and approximately 250 L/hour for diesel. The inlet hose is about 124 cm (48.8'') long with a 6 mm (0.236'') outer diameter and 4 mm (0.157'') inner diameter, and the outlet hose is about 140 cm (55'') long with a 12 mm (0.472'') outer diameter and 10 mm (0.39'') inner diameter.
It checks today's price at every store, compares the alternatives and answers in about a minute.








