Counter Culture DIY Original Fast Set is a 1:1 coating epoxy built for tumblers, pens, coasters and trays. Its draw is speed: about 5-10 minutes of working time, a recoat in as little as 1.5-2 hours, and full cure in roughly 24 hours at room temperature. That makes it a production resin for makers turning out multiple layers in a day, where slower tabletop epoxies force long waits between coats. It is a thin coating resin, not a deep-pour casting epoxy, so it suits surface gloss rather than thick molds. Buyers rate it highly, and the recurring caution is that the short pot life punishes slow mixing and application.
In stockReturn policy
Buyers rate it 4.8 out of 5 across 84 ratings, with praise centered on the quick recoat schedule and the clear gloss it leaves on tumblers. The main complaint is the short working time, which leaves little margin for error.
Original Fast Set Epoxy Resin is a 1:1 fast-cure epoxy coating resin from Counter Culture DIY, introduced in 2019. It is made for tumblers and other thin coatings, and it gives a clear, high-gloss finish. It suits tumblers, drip cups, pens, small coated accessories, coasters, trays, thin decorative surfaces and small art pieces.
The working time is approximately 5-10 minutes. You can recoat in as little as 1.5-2 hours, and full cure takes about 24 hours at room temperature. Because the work window is short, prepare the surface and tools before mixing.
Mix equal volumes of Part A and Part B, at least 2 fl oz total (about 59 mL). Scrape the sides and bottom of the cup while mixing. Apply a thin, even coating and let it cure undisturbed. Porous or decorated surfaces can be sealed first with a thin layer of Quick Coat.
