It checks today's price at every store, compares the alternatives and answers in about a minute.
The Ortur Laser Master 2 Pro S2 is a desktop diode laser engraver and cutter with a full-metal frame and a 400 × 400 mm working area. It runs at up to 15,000 mm/min and comes with either the 10W LU2-10A module or a 5.5W module. The 10W head has a 0.05 × 0.1 mm focal spot, integrated air assist, dual fans and a foldable focal gauge. It suits hobbyists and small shops engraving wood, leather and coated metal who want a larger bed than compact entry lasers, but it is an open-frame machine, so it needs a ventilated space and eye protection.
In stockReturn policy
Owners of the Laser Master 2 Pro line praise the large bed and solid metal frame for the class, and the 10W module's air assist helps on wood. Many note the open frame means smoke goes into the room, and setup and focus tuning take patience.
The Ortur Laser Master 2 Pro S2 is a desktop diode laser engraver and cutter built on an open metal frame. Its standard working area is 400 × 400 mm, and the Ortur extension kit expands it to 400 × 800 mm. Maximum speed is 15,000 mm/min, raised from 4,000 mm/min by the Ortur Laser 1.8 firmware for ESP32 controllers, which optimizes the motion algorithm.
The full-metal frame carries its own scale marks for positioning material, and a flexible cable chain keeps the cables tidy and protected while the head moves. The laser module has integrated air assist, dual fans and a foldable focal gauge, and weighs 235 g. Its focal spot measures 0.05 × 0.1 mm.
An emergency stop button and a flame detector with buzzer alarm are built in, along with tilt motion detection, a USB connection monitor that stops work if the cable is disconnected, laser exposure time detection and limitation, active position protection, and voltage and current safety control. The machine runs on LightBurn (paid; Windows and macOS) or LaserGRBL (free; Windows). It is an open-frame laser, so an enclosure, exhaust and supervision of the job are part of setting it up.