It checks today's price at every store, compares the alternatives and answers in about a minute.
The TwoTrees TTS-20 Pro is a desktop diode laser engraver and cutter built around a 20W optical-output laser head with up to 22W peak power. Its 418 × 418 mm work area and roughly 0.13 × 0.145 mm spot let it handle signs, gifts and small batch runs, and it runs on LightBurn or LaserGRBL. It ships about 98% assembled, so setup is quick for a machine of this size. Against 10W and 5W diode rivals it cuts faster and deeper on wood and dark acrylic, but it is still a diode laser: it will not cut clear acrylic or bare metal, and it needs a coated or marked surface to engrave metal.
In stockShips from South Africa · priced in ZAR (ZAR 10,398.00) · duties may applyReturn policy
Rated 4.7 out of 5 across 90 ratings, owners treat the TTS-20 Pro as a strong value 20W diode. They praise the cut depth on wood and the large bed for the class, and note that setup is quick. Complaints center on fumes and smoke from the open frame and on the limits of a diode on acrylic and metal.
The TwoTrees TTS-20 Pro is a desktop laser engraver and cutter built around a 20W COS diode laser module. The laser is rated at 20W optical output with up to 22W peak power and a wavelength of 450 ± 5 nm. It works over a 418 × 418 mm area, which suits signs, gifts and artwork.
The machine arrives approximately 98% pre-assembled. Engraving speeds reach up to 30,000 mm/min (500 mm/s), with engraving accuracy of approximately 0.13 × 0.145 mm. It runs on 24V 4A DC power and works with LightBurn and LaserGRBL software; LightBurn requires a separate paid licence.
It engraves wood, plywood, MDF, bamboo, cork, leather, paper, cardboard, natural fabric, felt, dark or opaque acrylic, slate, ceramic and coated glass. On anodized aluminum, painted or coated metals and stainless steel it marks the surface rather than cutting. Only materials confirmed as laser-safe should be used; PVC, vinyl and unknown plastics are not to be processed.
