It cuts thin wood, plywood, leather, cardboard and some dark acrylic. Clear acrylic and bare metal are out of reach for a diode laser this size.

Do I need an enclosure?

Yes for indoor use. The frame is open, so smoke and stray light spread; an enclosure with a fan and duct keeps fumes and glare contained.

Which software does it use?

It connects over USB and runs on LaserGRBL, which is free, or LightBurn, which is paid and adds layout and camera tools.

How big is the work area?

About 400 x 430 mm, enough for signs, cutting boards and sheet stock in one pass.

Is it hard to assemble?

Most owners finish in under an hour with the included tools; the belts and wiring are the fiddly parts.

Does it work with a rotary attachment?

Ortur sells a rotary roller for engraving tumblers and cylinders, and the controller supports it.

What do buyers say about the ORTUR Laser Master 2 Pro S2 Laser Engraver and Cutter?

Rated 2.8 out of 5 from 6 ratings.

ORTUR Laser Master 2 Pro S2 Laser Engraver and Cutter

Best price now

$369.00at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

ORTUR Laser Master 2 Pro S2 Laser Engraver and Cutter

Best price now

$369.00at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $369.00 at Walmart on Nov 11.

Our take on the ORTUR Laser Master 2 Pro S2 Laser Engraver and Cutter

The Ortur Laser Master 2 Pro S2 is a desktop diode laser engraver and cutter for wood, leather, acrylic, cardboard and coated metal. It is an open-frame machine with a fixed-focus laser module, belt-driven motion and a 400 x 430 mm work area, aimed at hobbyists and small craft sellers. Compared with enclosed CO2 lasers it is far cheaper and easier to set up, but it cannot cut thick stock and needs eye protection and ventilation. Owners like the assembly and the software support; the common complaints are weak air assist, smoke and the limits of diode power on clear acrylic and bare metal.

Best forHobbyists engraving wood, leather and coated metalSmall craft sellers making signs, tags and giftsMakers with a ventilated workspace and safety glasses

Pros

Large 400 x 430 mm work area for its class
Simple bolt-together frame that most owners assemble in under an hour
Works with LaserGRBL and LightBurn over USB
Fixed-focus module keeps setup repeatable
Good value against enclosed CO2 machines for light cutting

Cons

Open frame exposes eyes and lungs to laser light and smoke
Struggles to cut clear acrylic and bare metal without marking spray
No built-in enclosure or fume extraction
Air assist is basic, so charring shows on deep cuts
Belt-driven motion limits speed on fine detail

ORTUR Laser Master 2 Pro S2 Laser Engraver and Cutter prices at every store

WalmartNew
In stockSold by ORTUR-TECHReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$369.00Free shippingChecked Nov 11
Visit Walmart

What reviewers say

Owners rate the Laser Master 2 Pro S2 as a solid first diode laser: quick to build, easy to drive from LightBurn and capable on wood and leather. Complaints center on smoke, weak air assist and the power ceiling on harder materials.

What people mention

AssemblyPraisedOwners say the frame goes together quickly with clear instructions.
SoftwarePraisedIt runs smoothly with LightBurn and LaserGRBL over USB.
FumesCriticisedUsers report heavy smoke and smell, so an enclosure and extraction are needed.
Air assistCriticisedThe stock air assist is weak, leaving char on deep cuts.
Cutting limitsCriticisedClear acrylic and bare metal cannot be cut or marked without help.
Engraving qualityPraisedWood, leather and coated metal come out clean at moderate speeds.

About the ORTUR Laser Master 2 Pro S2 Laser Engraver and Cutter

OLM2PS2-LU2-10A-US

Specifications

color: OtherSource
actual_color: OLM2PS2-LU2-10A-USSource

Questions and answers

What can it cut?: It cuts thin wood, plywood, leather, cardboard and some dark acrylic. Clear acrylic and bare metal are out of reach for a diode laser this size.
Do I need an enclosure?: Yes for indoor use. The frame is open, so smoke and stray light spread; an enclosure with a fan and duct keeps fumes and glare contained.
Which software does it use?: It connects over USB and runs on LaserGRBL, which is free, or LightBurn, which is paid and adds layout and camera tools.
How big is the work area?: About 400 x 430 mm, enough for signs, cutting boards and sheet stock in one pass.
Is it hard to assemble?: Most owners finish in under an hour with the included tools; the belts and wiring are the fiddly parts.
Does it work with a rotary attachment?: Ortur sells a rotary roller for engraving tumblers and cylinders, and the controller supports it.
Where is the ORTUR Laser Master 2 Pro S2 Laser Engraver and Cutter cheapest?: At Walmart, for $369.00, as of our latest check.
What do buyers say about the ORTUR Laser Master 2 Pro S2 Laser Engraver and Cutter?: Rated 2.8 out of 5 from 6 ratings.