Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai › Ortur
Ortur
Ortur Laser Master 2 Pro S2 5.5W Laser Engraver and Cutter

Ortur Laser Master 2 Pro S2 5.5W Laser Engraver and Cutter

4.5· 64 ratings

Last price we saw

$209.99at Ortur.net, last seen Nov 2

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

Our take on the Ortur Laser Master 2 Pro S2 5.5W Laser Engraver and Cutter

The Ortur Laser Master 2 Pro S2 is a desktop diode laser engraver and cutter with a 400 x 400 mm work area and a 5.5W optical output module. It engraves wood, leather, acrylic and coated metal, and can cut thin plywood and similar stock in multiple passes. It runs on GRBL over USB and works with LightBurn or LaserGRBL, with an emergency stop and tilt/position protection built in. Its latest best price is $159 at Distritech as of November 3.

Best forHobbyists engraving wood, leather and coated metal
Small-batch custom gifts and signage
Makers who want LightBurn support on a budget
Beginners stepping up from a smaller diode laser
Pros
  • Large 400 x 400 mm work area for the price
  • 5.5W optical output handles engraving and light cutting
  • Works with LightBurn and free LaserGRBL
  • Emergency stop plus tilt and position protection
  • Fast feed rate up to 15,000 mm/min on engraving moves
Cons
  • Diode laser struggles with clear acrylic and bare metal without marking spray
  • Cutting 12 mm stock takes many slow passes and is not realistic for most woods
  • No enclosure or eye protection included; safety glasses are essential
  • Computer must stay connected during jobs; no onboard controls beyond the stop button
  • 230V AU plug version may need an adapter elsewhere

Ortur Laser Master 2 Pro S2 5.5W Laser Engraver and Cutter prices at every store

  • Ortur.netCheck price at Ortur.net

Ortur Laser Master 2 Pro S2 5.5W Laser Engraver and Cutter price history

Lowest price we've seen: $209.99 on Nov 2 at Ortur.net. Tracked across 1 store since Nov 2.

What reviewers say

Owners rate it around 4.5 out of 5 across 64 ratings, with most praise going to assembly, cut quality on thin wood and the large bed. Complaints center on the lack of an enclosure and the limits of diode cutting on thicker material.

Pros
  • Straightforward assembly and setup
  • Clean engraving on wood and coated metal
  • Large work area for the money
  • Reliable GRBL connection with LightBurn
Cons
  • Open frame means smoke and glare in the room
  • Struggles to cut thicker or denser woods
  • Frame flexes if not squared carefully

Specifications

Working Area
400mm*400mm (1.6W/5.5W/10W)
Primary Functionality
Laser Engraver, Cutter, Cutting, Laser Engraving
Compatible Materials
Metal, Stainless steel
Feed Rate
Up to 15,000 mm/min
Machine Subtype
Laser Engraving & Cutting Machine
Machine Type
Laser Engraving & Cutting Machine
Base Type
Table Lase Engraver Cutter
Machine Precision
Precision up to 0.01mm
Dimensions Depth
57 cm
Dimensions Height
13 cm
Dimensions Length
59.99 cm
Machine Weight
235g (Laser Module)
Overall Dimensions
59.99 x 57 x 13 cm
Safety Features
Active position protection, Emergency stop switch, Sloping position protection
Software Compatibility
LightBurn, LaserGRBL
Control Type
Computer controlled
Controller Type
GRBL
Control Panel
Emergency Stop Button
Power Output
10W (LU2-10A Laser Module)
Voltage
230V (AU plug)
Power Requirement
100-240V wide voltage
Cutting Depth
up to 12mm thick
Cutting Speed
Up to 15,000mm/min

Questions and answers

Is the 5.5W version enough for cutting?
It cuts 3 mm basswood and thin plywood in a few passes at moderate speed. Thicker stock up to the rated 12 mm needs many passes and often chars the edges, so treat cutting as a secondary use.
Does it work with LightBurn?
Yes. It uses a GRBL controller, so LightBurn connects directly, and LaserGRBL is a free alternative. Both run over USB from a computer.
Can it engrave metal?
It marks coated or anodized metal and stainless steel with a marking spray or coating. Bare metal will not engrave with a diode laser at this power.
What comes in the box?
The kit includes the assembled frame parts, the laser module, cables, power supply and basic tools. Safety glasses and an enclosure are not included, so buy goggles before the first job.
Is it worth it over the standard Laser Master 2?
The Pro S2 adds a larger 400 x 400 mm bed, faster movement and better position protection. If you only engrave small items, the cheaper base model is enough.
When is it cheapest?
Diode laser prices drop around Black Friday and back-to-school sales. The $159 at Distritech as of November 3 is a low point against recent listings.
What do buyers say about the Ortur Laser Master 2 Pro S2 5.5W Laser Engraver and Cutter?
Rated 4.5 out of 5 from 64 ratings.

More from Ortur

  • O
    Ortur H20
    Ortur H20
  • O
    Ortur Laser Master 3 Diode Laser Engraver & Cutter
    Ortur Laser Master 3 Diode Laser Engraver & Cutter
  • O
    Ortur Laser Master 3 10W Laser Engraver Cutter
    Ortur Laser Master 3 10W Laser Engraver Cutter
  • O
    Ortur Laser Master 3 Laser Engraver
    Ortur Laser Master 3 Laser Engraver
All Ortur deals and products →