
Oscillating Spindle and Belt Sander with 3.5A Motor
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A benchtop combination machine that sands curves and edges with oscillating spindles and flat stock with a 4 x 24 inch belt. The 3.5A motor drives 58 oscillations per minute with a 5/8 inch stroke, which keeps drums from loading and burning as they cut. Four rubber drum sizes from 3/4 to 2 inch and a tilting table cover most hobby and light-shop shaping. It is a compact two-in-one for a small shop; dedicated floor machines run larger belts and more power, but take far more space and cost.
Availability unknown
Owners of this class of benchtop oscillating sander tend to praise the two-in-one format and the smooth spindle finish, while noting the motor bogs down on heavy stock and dust control needs a vacuum.
This is a combination spindle and belt sander driven by a 3.5-amp, 1/2 HP motor running on 120V single-phase power. The spindle turns at 2000 RPM and oscillates 58 times per minute with a 5/8-inch stroke, while the belt runs at 1575 FPM.
The sanding belt measures 4 inches by 24 inches, and the sanding drums measure 3/4 inch, 1 inch, 1-1/2 inches and 2 inches in diameter. The beveling work table measures 16-1/4 inches by 16-3/4 inches and tilts from 0 to 45 degrees. A 1-1/2-inch dust port connects to dust collection.
Onboard storage holds the accessories and sandpaper. The sander measures 16-1/2 inches wide, 18-1/2 inches deep and 18-1/2 inches high, and weighs approximately 32 lbs.







