
Oscillating Spindle Sander & Belt Sander, 2 in 1 Woodworking Machine, 500W Motor, 5/8" Stroke, 5 Sleeves & 4" X 24" Belt, 0-45° Tilting Table
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Hmluxury is a benchtop combination sander that runs either a vertical oscillating spindle or a 4" x 24" belt from one 500W motor. The spindle side oscillates 58 times a minute with a 5/8" stroke and spins up to 2000 RPM, while the belt runs up to 1575 FPM. Five spindle sleeves from 1/2" to 2" cover curves and inside contours, and the table tilts 0 to 45 degrees for angled edges. It suits hobbyists and small shops that want both sanding jobs without two machines, but at 38 pounds it is a fixed benchtop tool, and it lacks the variable speed and larger tables of dedicated floor models.
In stockReturn policy
This is a two-in-one woodworking machine that works as both an oscillating spindle sander and a belt sander. A 500W corded electric motor runs the sanding action, and the machine switches between the two sanding modes.
The spindle runs at up to 2000 RPM with 58 oscillations per minute and a 5/8" stroke, so the sleeve rotates while moving up and down. The belt runs at speeds up to 1575 feet per minute. Five sanding sleeves come with the machine, sized 1/2", 3/4", 1", 1-1/2" and 2", along with a 4" x 24" sanding belt, and a quick-change system is used to swap them.
The table tilts from 0° to 45° for sanding angled edges, arcs, curves and contoured workpieces. A 1-17/32" dust port connects to a dust collection system. The machine weighs 38 pounds.