Owens Corning R-21 Un-Faced Batts are flexible fiberglass insulation batts. They are used in roof/ceiling and interior/exterior wall applications. They install in wood or metal framing cavities or between furring channels.
The batts can be stapled or friction-fit, and they can be trimmed and fabricated with a utility knife. They are inorganic and non-corrosive to steel, aluminum or copper. They are dimensionally stable and will not decay or slump in the cavity. They also improve interior noise control and meet thermal specifications.
- R-Value
- R-21
- Type
- Un-faced fiberglass batts
- Uses
- Roof/ceiling and interior/exterior walls
- Installation
- Wood or metal framing cavities, or between furring channels; staple or friction-fit
- Sizes
- 5.5 in. x 15 in. x 93 in.; 5.5 in. x 15 in. x 105 in.; 5.5 in. x 15.25 in. x 93 in.; 5.5 in. x 23 in. x 93 in.; 5.5 in. x 23.25 in. x 93 in.; 6 in. x 16 in. x 96 in.; 6 in. x 24 in. x 96 in.
- Wood framing sizes
- 5.5 in. x 15 in. x 93 in.; 5.5 in. x 15 in. x 105 in.; 5.5 in. x 15.25 in. x 93 in.; 5.5 in. x 23 in. x 93 in.; 5.5 in. x 23.25 in. x 93 in.
- Metal framing sizes
- 6 in. x 16 in. x 96 in.; 6 in. x 24 in. x 96 in.
- Coverage per bag
- 77.5, 87.5, 68.94, 89.13, 90.09, 74.69 and 112 sq ft, in the size order listed above
- Batts per bag
- 8, 8, 7, 6, 6, 7 and 7, in the size order listed above
- IRN
- U89B, K27, BU107, U69A, BU112, BU104, BU110, in the size order listed above
- Cutting
- Trim with a utility knife