The Perform PD254TS is a compact 254mm table saw with a 2kW motor, a coated aluminium table and 19mm T-slots on both sides of the blade. It cuts up to 80mm deep at 90 degrees and 50mm at 45 degrees, and the rip fence gives 300mm of width, or 650mm with the side table extension fitted. The soft start keeps the motor from jolting on switch-on and lowers noise at startup, which suits home workshops and shared spaces. Against bigger cast-iron contractor saws it trades mass and table size for portability, but the bolted tilt and height mechanism and front-and-back locking fence are features usually found on pricier benches.
In stockShips from the UK · duties may applyReturn policy
Owners rate it highly, with 22 ratings averaging 4.6 out of 5. They like the power for its size and the rigidity of the fence, and treat it as a solid bench for home workshop work.
The Perform PD254TS is a compact 254mm saw bench for home workshops and DIY use. It has a solid steel frame that is easy to transport and store. A 2kW motor with a soft start powers up gradually, which reduces noise.
The maximum depth of cut is 80mm at 90° and 50mm at 45°. The rip fence cuts up to 300mm wide, or up to 650mm with the side table extension. With the extensions fitted, the table is 1,025mm wide. The fence locks at the front and back for rigid, accurate cuts.
The coated aluminium table has 19mm T-slots on either side of the blade for mitre fences and jigs. The tilt and height adjustment mechanism is bolted to the chassis instead of the underside of the table. Two 35mm dust extraction ports connect to a suitable dust extractor. The saw comes with a fitted 230V plug.
