What ceiling height does this ladder fit?

It is made for ceilings from 10.5 to 11 ft. The ladder is sized to that range, so it will not adjust to shorter or taller ceilings.

What size opening does it need?

It requires a rough opening of 39.4 x 27.5 inches. Check your existing frame before ordering.

How much weight can it hold?

The alloy steel frame is rated for 660 lb. That is roughly double the capacity of most wooden pull-down ladders.

What comes in the box?

The ladder and a pulling rod for extending and retracting it. No handrail or insulation is listed.

Is it hard to install?

It drops into a standard framed opening, but the steel build is heavy, so two people should lift it into place. Cutting or reframing the ceiling opening is needed if yours is a different size.

How does it compare with an aluminum attic ladder?

It holds more weight and feels stiffer underfoot, but it weighs more and is harder to handle during installation.

PEXCHO Alloy Steel Pull Down Attic Ladder 660 Lbs for 11 ft

Best price now

$899.99at Lowe'sChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Lowe's

PEXCHO Alloy Steel Pull Down Attic Ladder 660 Lbs for 11 ft

Best price now

$899.99at Lowe'sChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Lowe's

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $899.99 at Lowe's on Nov 10.

Our take on the PEXCHO Alloy Steel Pull Down Attic Ladder 660 Lbs for 11 ft

The PEXCHO is a pull-down attic ladder made of alloy steel, built for ceilings around 10.5 to 11 ft. It carries a 660 lb load rating, well above the 250 to 350 lb typical of wooden and aluminum folding ladders, and its retractable design folds flat into the ceiling. It needs a standard 39.4 x 27.5 inch rough opening and comes with a pulling rod. It suits homeowners with a tall ceiling who want a sturdy, space-saving access stair; the trade-off is a heavier steel build and a fixed opening size.

Best forHomeowners with 10.5 to 11 ft ceilingsHeavy users and frequent attic accessGarages and workshops needing a sturdy stairAnyone replacing a worn wooden ladder

Pros

660 lb load rating, high for a pull-down ladder
Alloy steel frame for stiffness
Fits ceilings from 10.5 to 11 ft
Slip-resistant steps
Retractable, folds flat to save space
Pulling rod included for extension and retraction

Cons

Steel construction is heavier to handle than aluminum
Only fits a 39.4 x 27.5 inch opening
Fixed height range, not adjustable to other ceilings
No handrail or insulation mentioned

PEXCHO Alloy Steel Pull Down Attic Ladder 660 Lbs for 11 ft prices at every store

Lowe'sNew
In stock
$899.99Checked Nov 10
Visit Lowe's

PEXCHO Alloy Steel Pull Down Attic Ladder 660 Lbs for 11 ft price history

$899.99$899.99

Nov 1Nov 10

Lowest price we've seen: $899.99 on Nov 1 at Lowe's. Tracked across 1 store since Nov 1.

From Lowe's

Heavy duty alloy steel construction supports up to 660 lbs
Fits ceiling heights from 10.5 to 11 ft
Requires a standard 39.4 x 27.5 inch opening
Includes a pulling rod for smooth extension and retraction
Space saving retractable design
Slip resistant steps for enhanced stability

Materials: Alloy steel
Sizing: Fits ceiling heights from 10.5 to 11 ft; requires a 39.4 x 27.5 inch opening
Returns: Free returns; return in store or ship it back for free, eligibility rules apply
Shipping: Sold and shipped by Tooliom
In the box: Pulling rod

About the PEXCHO Alloy Steel Pull Down Attic Ladder 660 Lbs for 11 ft

This pull-down attic ladder is made of alloy steel and supports up to 660 lbs. It retracts into the ceiling opening, so it takes up little space when not in use.

The steps are slip resistant for added stability. A pulling rod helps extend and retract the ladder smoothly.

The ladder fits ceiling heights from 10.5 to 11 ft. It requires a standard 39.4 x 27.5 inch opening.

Material: Alloy steel
Load capacity: 660 lb
Ceiling height: 10.5 to 11 ft
Ladder height: 11 ft
Opening size: 39.4 x 27.5 in
Steps: Slip resistant
Design: Retractable, pull down
In the box: Pulling rod

Specifications

Height: 11 ft
Load Capacity: 660 lb capacity
CA Residents: Prop 65 Warning(s): false

Questions and answers

What ceiling height does this ladder fit?: It is made for ceilings from 10.5 to 11 ft. The ladder is sized to that range, so it will not adjust to shorter or taller ceilings.
What size opening does it need?: It requires a rough opening of 39.4 x 27.5 inches. Check your existing frame before ordering.
How much weight can it hold?: The alloy steel frame is rated for 660 lb. That is roughly double the capacity of most wooden pull-down ladders.
What comes in the box?: The ladder and a pulling rod for extending and retracting it. No handrail or insulation is listed.
Is it hard to install?: It drops into a standard framed opening, but the steel build is heavy, so two people should lift it into place. Cutting or reframing the ceiling opening is needed if yours is a different size.
How does it compare with an aluminum attic ladder?: It holds more weight and feels stiffer underfoot, but it weighs more and is harder to handle during installation.
Where is the PEXCHO Alloy Steel Pull Down Attic Ladder 660 Lbs for 11 ft cheapest?: At Lowe's, for $899.99, as of our latest check.
Is the PEXCHO Alloy Steel Pull Down Attic Ladder 660 Lbs for 11 ft at its lowest price?: Yes: $899.99 is the lowest price we've seen for it since November 1.