This is a replacement motion sensor for outdoor security flood lights. It has a built-in PIR sensor and a photocell, and it is IP65 waterproof. It works on 120V AC, 60Hz and fits 3-wire fixtures, indoors or outdoors, such as in garages, driveways, patios, porches and pool areas.
In Auto mode, the light turns on when motion is detected and turns off after 1 to 10 minutes (adjustable). The sensor detects movement up to 60 ft ahead with a 240° sensing angle and up to 18 ft below with a 360° sensing angle.
In Dusk-to-Dawn mode, the photocell turns the light on at dusk and off at dawn. Motion detection and delay time are disabled in this mode. In Manual Override mode, toggling the wall switch OFF then ON within 3 seconds gives continuous light for up to 8 hours, and the light turns off at dawn.
- Voltage
- 120V AC, 60Hz
- Max load
- 72W for LED bulbs; 300W for incandescent bulbs
- Sensor type
- PIR motion sensor with photocell
- Forward detection
- Up to 60 ft, 240° sensing angle
- Downward detection
- Up to 18 ft, 360° sensing angle
- Off delay
- 1–10 minutes, adjustable
- Light levels
- OFF to ON: 50–250 LUX; ON to OFF: max. 800 LUX
- Manual override
- Up to 8 hours, turns off at dawn
- Water resistance
- IP65 waterproof
- Compatibility
- 3-wire fixtures, indoor and outdoor
- Certification
- UL listed
- In the box
- 3 color-coded wire nuts