PolyLite PETG is a PETG filament for FDM 3D printers. It uses a high-speed formula that prints at up to 300 mm/s, or over 500 mm/s with high-flow nozzles. The filament has strong inter-layer bonding, low warping and clog-free printing, including on long prints. It prints without an enclosure and works with AMS and multi-material systems.
Parts printed with the filament have a heat deflection temperature of about 70 °C and chemical resistance for indoor and outdoor use. Uses include prototypes and end-use parts such as gears, brackets, fixtures, outdoor tools, sports accessories and cosplay props.
The filament is hygroscopic. Keep it dry to prevent excessive stringing. If it has absorbed moisture, dry it at 60 °C for 6 hours.
- Material
- PETG
- Filament diameter
- 1.75 mm
- Formula
- High-speed, high-flow
- Print speed
- Up to 300 mm/s; over 500 mm/s with high-flow nozzles
- Layer adhesion
- Strong inter-layer bonding
- Warping
- Low
- Printing
- Clog-free, including long prints
- Heat deflection
- About 70 °C
- Chemical resistance
- Yes
- Printer compatibility
- Most FDM printers
- Enclosure
- Not required
- Multi-material
- Works with AMS and multi-material systems
- Applications
- Prototypes, end-use parts, gears, brackets, fixtures, outdoor tools, sports accessories, cosplay props