What nails does the FN250C use?

It drives 16-gauge FN-style finish nails from 1 inch to 2-1/2 inches long, loaded in a 100-nail rear-load magazine.

Does it need a compressor?

Yes. It is a pneumatic tool and needs an air compressor and hose; it has no battery or corded motor.

Can I adjust how deep the nail sets?

Yes. There is a tool-free depth-of-drive adjustment with detents so you can set nail heads flush or slightly below the surface.

What trigger does it have?

It has a sequential-style trigger with a lock-off switch. There is no bump-fire mode.

How do I clear a jam?

Use the tool-free jam release mechanism to open the driver guide and remove the stuck nail.

What comes in the box?

The nailer itself, with its integrated rubber grip and adjustable belt hook. A case and fittings are not included.

PORTER-CABLE Finish Nailer, 16GA, 1-Inch to 2-1/2-Inch (FN250C)

Best price now

$100.00at WalmartChecked Nov 8

Prices are checked against each store and labelled with when.

Visit Walmart

PORTER-CABLE Finish Nailer, 16GA, 1-Inch to 2-1/2-Inch (FN250C)

Best price now

$100.00at WalmartChecked Nov 8

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $100.00 at Walmart on Nov 8.

Our take on the PORTER-CABLE Finish Nailer, 16GA, 1-Inch to 2-1/2-Inch (FN250C)

The PORTER-CABLE FN250C is a pneumatic 16-gauge finish nailer that drives FN-style nails from 1 inch to 2-1/2 inches. It uses a maintenance-free motor, an internal piston catch for consistent power, and a rear exhaust that directs air away from the work. Tool-free depth adjustment with detents and a tool-free jam release make setup and clearing fast, and a sequential trigger with a lock-off switch adds control. It suits trim carpenters and serious DIYers who want a simple, dependable oil-free-style air nailer rather than a battery platform tool.

Best forTrim and molding installationDoor and window casing workCabinet and furniture assemblyDIYers with an air compressor

Pros

Tool-free depth-of-drive adjustment with detents
Tool-free jam release for quick clearing
Rear exhaust keeps oil and debris off the work
Internal piston catch gives consistent drive power
Sequential trigger with lock-off switch
Adjustable belt hook and low-nail indicator

Cons

Requires a separate air compressor and hose
Sequential trigger only, no bump-fire mode
No carrying case included
Heavier and tethered compared with cordless finish nailers

PORTER-CABLE Finish Nailer, 16GA, 1-Inch to 2-1/2-Inch (FN250C) prices at every store

WalmartNew
In stockSold by Hyland SupplyReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$100.00Checked Nov 8
Visit Walmart

What reviewers say

Owners of the FN250C generally describe it as a reliable, no-frills 16-gauge nailer that sets trim nails consistently and clears jams quickly. Complaints center on the air-hose tether and the lack of a bump-fire trigger.

What people mention

Drive consistencyPraisedOwners say nails seat at a uniform depth on trim and casing.
Jam clearingPraisedThe tool-free release is described as quick and simple to use.
Air hoseCriticisedUsers note the hose limits movement and adds setup time compared with cordless nailers.
TriggerMixedThe sequential trigger is seen as safe but slower for high-volume nailing.
BuildPraisedLong-term owners report the tool holds up to regular jobsite use.

About the PORTER-CABLE Finish Nailer, 16GA, 1-Inch to 2-1/2-Inch (FN250C)

The PORTER-CABLE FN250C is a 16-gauge finish nailer that drives 16 GA FN finish nails from 1 to 2-1/2 inches long. It has a maintenance-free motor and a die-cast aluminum body. The body is lightweight and weighs 3.85 pounds.

An internal piston catch delivers consistent maximum power on every shot. A rear exhaust keeps contaminants away from the work. The depth-of-drive adjustment is tool-free and has detents for setting nail heads properly. The tool-free jam release makes it easy to remove nails.

The sequential-style trigger has a lock-off switch. The contact safety sits behind the driver guide for better visibility. The nailer also has an adjustable belt hook, an integrated rubber grip and a low nail reload indicator. The 100-nail magazine loads from the rear and locks.

Nail type: 16 GA FN finish nails, 1 to 2-1/2 inches long
Magazine: 100 nails, rear load and lock style
Operating pressure: 70 to 120 PSI
Trigger: Sequential style with lock-off switch
Body: Die-cast aluminum
Dimensions: 10.6 x 11.8 inches
Weight: 3.85 pounds
Depth of drive: Tool-free adjustment with detents
Jam release: Tool-free
In the box: Finish nailer, 1/4" fitting, safety glasses, carrying case

Questions and answers

What nails does the FN250C use?: It drives 16-gauge FN-style finish nails from 1 inch to 2-1/2 inches long, loaded in a 100-nail rear-load magazine.
Does it need a compressor?: Yes. It is a pneumatic tool and needs an air compressor and hose; it has no battery or corded motor.
Can I adjust how deep the nail sets?: Yes. There is a tool-free depth-of-drive adjustment with detents so you can set nail heads flush or slightly below the surface.
What trigger does it have?: It has a sequential-style trigger with a lock-off switch. There is no bump-fire mode.
How do I clear a jam?: Use the tool-free jam release mechanism to open the driver guide and remove the stuck nail.
What comes in the box?: The nailer itself, with its integrated rubber grip and adjustable belt hook. A case and fittings are not included.
Where is the PORTER-CABLE Finish Nailer, 16GA, 1-Inch to 2-1/2-Inch (FN250C) cheapest?: At Walmart, for $100.00, as of our latest check.