This is a 3S lithium-polymer battery pack with a compact, lightweight soft-pack build. It is made for compatible RC cars, trucks, crawlers, boats, airplanes, helicopters and FPV platforms, including models with limited battery-compartment space.
The pack is rated at 11.1V nominal and 1800mAh, with a 75C continuous discharge rating. It comes with a factory-installed XT60 main connector and a JST-XH balance connector, which lets each cell be monitored and balanced during charging.
Before installing, confirm the voltage, dimensions, connector type, connector polarity and recommended discharge rating your model requires. Charge only with a LiPo-compatible balance charger set to 3S. The battery can serve as a replacement or an additional pack, and it carries a six-month limited warranty against defects in materials and workmanship. The warranty does not cover physical or crash damage, improper mounting, overcharging, deep discharging, or damage from excessive discharge current.
- Battery type
- Lithium Polymer (LiPo), soft pack
- Cells
- 3S
- Nominal voltage
- 11.1V
- Full charge
- 12.6V
- Capacity
- 1800mAh
- Discharge rating
- 75C continuous
- Main connector
- XT60, factory installed
- Balance connector
- JST-XH
- Dimensions
- 88 x 34 x 25mm (length x width x height)
- Weight
- 154g
- Compatibility
- Compatible 1/10-scale RC cars and trucks, crawlers and trail trucks, airplanes, helicopters, boats, FPV platforms, and other models needing a 3S 1800mAh LiPo with an XT60 connector and matching dimens
- Condition
- Brand new, factory sealed
- Warranty
- Six-month limited warranty
- In the box
- 1 PowerHobby 3S 1800mAh 75C LiPo battery with XT60 plug
- Part number
- 3S 1800 75C XT60
- UPC
- 800185009764